Can the Roadmaster Quiet Hitch # RM-061 Be Used with a Cushioned Ball Mount

Question

Question:

Can the anti rattle device be used with the shock absorbing style receiver hitch that has the elastomer that cushions the hitch pin?

asked by: Dave W

0

Expert Reply:

The Quiet Hitch, # RM-061, is not rated to be used while towing a trailer even with a cushioned ball mount. I recommend the simple anti-rattle device # MPG908. It wedges in on the side to stop movement. However, the use of a anti-rattle device could potentially cancel out the cushioning effect of the ball mount and it would perform like a normal ball mount.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 3

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hey Karen, you'll need a specific adapter but the answer is yes, you can use a 1-1/4 inch to 2 inch adapter for your bike rack on your 2017 Ford Fusion with the Draw-Tite Sportframe Trailer Hitch Receiver #24897. What you will need is one…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

To keep your back end from squatting, I recommend the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension item #CSS-1094R. These insert into your rear springs and keep your suspension from being pushed down by the weight of your…

view full answer...

Can the Roadmaster Quiet Hitch # RM-061 Be Used with a Cushioned Ball Mount

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching