Tekonsha Brake Controller Harness in 2019 Ford Expedition

Question

Question:

I have ordered your prodigy p3 brake controler for my 2019 ford expidition im having trouble finding the plug in adapter for this. Can you help

asked by: Evan

0

Expert Reply:

The harness you need to install the Prodigy P3 brake controller, part # 90195, in your 2019 Forrd Expedition is part # 22292.

expert reply by: Charles S

0

Answer 1

Yes, you are looking for part number, #90195 for the Tekonsha Prodigy P3 Trailer Brake Controller and need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers, #TK93VR too. This adapter plugs into the 4-pin connector on your…

view full answer...

Answer 2

The brake controller that I recommend for your 2022 Jeep Gladiator with tow package is the Tekonsha Prodigy P3 Trailer Brake Controller #90195 which will use the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers #3073-P to plug into your…

view full answer...

Answer 3

There should be trailer brake controller provisions on a 2015 Coachmen Leprechaun Motorhome, simply look for the brake controller plug behind the storage tray in the dash. If you need help with this you can reference the video attached below at…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 8

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 9

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 10

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

view full answer...

Answer 11

Yes, the Curt Custom Base Plate Kit #C36JR is confirmed to fit your 2020 Ford Expedition 4wd. It will also allow for you to use a Blue Ox Tow Bar #BX7420. Do ensure you install a Charge Line Kit #RM-156-25 as the battery will while being flat towed…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Tekonsha Brake Controller Harness in 2019 Ford Expedition

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching