Availability of 4-Pin Roadmaster FuseMaster Fuse Bypass

Question

Question:

Do you sell a 4 pin round on/off rocker switch? Want one just like the one in part # RM76512. Thanks

asked by: Larry

0

Expert Reply:

We have the Roadmaster FuseMaster Fuse Bypass # RM76512 that uses 4 pins like you are wanting as it shuts off two circuits.

I attached an install video for this on a 2019 Chevy Sonic for you to check out as well.

expert reply by: Jameson C

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

It looks like your 2016 Ford Focus has a separate wiring system, which means the brake and turn signals are sent along separate wires. I have attached two wiring diagrams for the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267.…

view full answer...

Answer 3

Yes, you will need to utilize the black wire on the Roadmaster Brake-Lite relay kit #RM-88400. You will need to find that green/silver wire at the brake switch (above your brake pedal), cut it about 6 inches away from the switch. The end going to the…

view full answer...

Answer 4

I took a look in the owner's manual for a 2012 Honda CR-V and it states that if you will be towing for more than 8 hours in a day you will need to remove the 7.5 amp accessory radio fuse and 7.5 amp accessory key lock fuse. These fuses should…

view full answer...

Answer 5

You would not lock out the steering on the vehicle being flat towed. Doing so would cause the wheels to scrub (drag sideways) when turning. The steering needs to be unlocked and the wheels will turn accordingly and straightened back out when needed.…

view full answer...

Answer 6

Pulling those fuses are supposed to disconnect the power so that your battery doesn't drain so, naturally, your 2019 Chevy Sonic won't start without power. I recommend using the FuseMaster #RM76512 for the BCM1 and BCM2 fuses and then the…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey Dave, The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would not be intertwined or interfere with the Blue Ox Patriot #BLU37TR. This wire harness is simply plugging into the motorhome and Gladiator tail lights to copy the light…

view full answer...