Ratchet Strap that Can Attach to Top Channel of Yakima Overhaul Load Bars

Question

Question:

i want to be able to mount this to a Yakima overhaul hd rack was wanting to know what size t bolt and nut to be able to mount it

asked by: Craig

0

Expert Reply:

We have a set of ratchet straps that were designed to attach to the top channels of crossbars like your Yakima Overhaul rack with the Ratchet Grab Tie-Down Strap # RRSRG. This comes with everything needed to attach and the straps are 78 inches long.

expert reply by: Jameson C

0

Answer 1

For the 2018 Winnebago View 24D class C motorhome built on a 2017 Mercedes-Benz Sprinter 3500 chassis we do have a confirmed fit for an aftermarket rear anti-sway bar. For a supplemental sway bar that works along with the factory bar, and that…

view full answer...

Answer 2

The 2019 Winnebago View 24D will use the Roadmaster Rear Anti-Sway Bar #RM-1209-131. There is not a front anti-sway bar compatible with your vehicle, but you will appreciate the stability the rear anti-sway bar will offer. I've attached a video…

view full answer...

Answer 3

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 8

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 9

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Ratchet Strap that Can Attach to Top Channel of Yakima Overhaul Load Bars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching