Replacement 1-3/4 Wide 25-1/2 Long Slipper Leaf Spring
Question:
Hello, i am looking at your leaf springs, currently i have a 2 leaf spring, i took it off and measured 25.5inch from center bushing hold to end of hook, it is a radius end leaf spring, 25.5inch Length 1 3/4inch width.. i would like to know which of these should work thanks
asked by: Anthony H
Expert Reply:
The closest thing we have to those dimensions is the 3-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles # SP-179275. This measures 24-5/8" from the center of the eye to the end of the hook. Over time leaf springs can flatten out so typically a replacement leaf spring will be a little shorter than the current one. A 1" difference is a bit longer than normal, but if your leaf springs are pretty flat then I would venture to say this is what you're looking for. Just make sure the 2,000 lb weight capacity (for both springs combined) is correct for your application and you're good to go!
I have attached a photo with the dimensions and a review video that you can check out as well. Please note that you need to replace the leaf springs on the same axle at the same time. It's also worth noting that the best way to measure your leaf spring is with it suspended in the air so no weight is on it.
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 2000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 24-5/8 Inch Long
- Universal Group
more information >
Continue Researching
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: Trailer Hitch
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Video: Universal Group Trailer Suspension - Leaf Spring Suspension - SP-177275 Review
- Q&A: Replacement Hook Style Leaf Spring for Trailer
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Search Results: tire covers
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23102 Review
- Shop: Spare Tire Cover
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Shop: Spring Keeper Bolt with Locknut for Slipper Springs - 3-1/4" Long
- Search Results: leaf springs
- Q&A: Comparing 4.80R12 and 145/80R12 Trailer Tire For Triton XL Carrying Jet Ski
- Video: Review of etrailer 2 Leaf Slipper Spring - e29SR
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-EZ-2K Review
- Video: Universal Group Trailer Suspension - Leaf Spring Suspension - SP-179275 Review
- Q&A: Are Radius End And Flat End Slipper Springs For A Trailer Interchangeable?
- Search Results: trailer leaf spring
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Do Trailer Slipper Springs Normally Slip Out of their Rear Hangers
- Q&A: Replacement Slipper Spring To Upgrade Stock Malone Microsport Trailer Leaf Springs
- Q&A: How To Determine Proper Axle Placement On Single Axle Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: 68149