Replacement Tumbler Lock for th Toolbox on my 2019 Airstream Bambi
Question:
We own a 2019 Bambi Airstream..... the key on the tool box compartment is not working ..... we want to change the tumbler...... what do we order .... I do not see Bambiinch airstream on your list Airstream Sport
asked by: Harry G
Expert Reply:
We have several different locks available but they are not made specific to a particular camper. They will replace the tool box lock completely. You will choose the replacement based off of your depth of latch thickness. Or the distance from the mounting surface to the area the latch goes behind. They are designed to fit the common 3/4" hole found in most tool boxes and storage areas on RVs.
For instance the Camco Cam Lock part # CAM44340 is designed for a depth of latch thickness of 5/8" in the straight configuration. With the offset you can adapt it to have a 1/2" or a 3/4" depth.
The Camco Cam Lock part # CAM44353 is 7/8" straight and 3/4" or 1" with the offset.
The Camco Cam Lock part # CAM44363 is 1 1/8" straight and 1' or 1 1/4" with the offset.
These are available in several designs and I have linked the entire selection for you to check out if these options do not suit you.
Products Referenced in This Question
Camco Cam Lock - Straight or Offset - Key Operated - 5/8" Thick
- RV Locks
- Compartment Door
- Cam Locks
- Keyed Unique
- 2 Keys
- Offset Cam
- Straight Cam
- 5/8 Inch Diameter
- Silver
- Camco
more information >
Camco Cam Lock - Straight or Offset - Key Operated - 7/8" Thick
- RV Locks
- Compartment Door
- Cam Locks
- Keyed Unique
- 2 Keys
- Offset Cam
- Straight Cam
- 7/8 Inch Diameter
- Silver
- Camco
more information >
Camco Cam Lock - Straight or Offset - Key Operated - 1-1/8" Thick
- RV Locks
- Compartment Door
- Cam Locks
- Keyed Unique
- 2 Keys
- Offset Cam
- Straight Cam
- 1-1/8 Inch Diameter
- Silver
- Camco
more information >
Product Page this Question was Asked From
Replacement Key for UWS Toolboxes - CH510
- Accessories and Parts
- ATV-UTV Tool Box
- Trailer Tongue Box
- Trailer Tool Box
- Truck Tool Box
- Underbody Tool Box
- Keys
- UWS
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Wheel Stud For Dexter Hub & Drum 8-219-13UC3
- Q&A: What Size Wire Should you Use with a 13K-LB Winch
- Q&A: Correct Way To Wire Warn Trailer Winch Up to Be Powered By Truck Battery
- Q&A: Can 12k Winch Ground to Frame or Does it have to Run to Battery Post
- Q&A: Replacement Wheel Stud For Dexter 7000 lb Axle With 8 Lug Hub Assembly
- Q&A: When Replacing Just 2 Tires on Tandem Axle Trailer Which Axle Should the New Tires Go On
- Q&A: Winch Mounting Plate for 2 Hitch Receiver to Fit Warn M12000 Winch
- Article: How to Install E-Track in 3 Easy Steps
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft