Replacement Key for a Sears Sport 20-SV Cargo Box with 014 Lock Code

Question

Question:

Hi cannot find the key for our Sears Sport 20 Sv replacement key, the lock says 014. Do you have a key replacement to fit that lock? Thanks so much!!

asked by: Yolanda N

0

Expert Reply:

The correct replacement key for a Sears Sport 20-SV Cargo Box with 014 lock code is the Replacement Key for Thule Racks and Carriers part # THKEYN014. Thule made the Sears cargo box so you can use their keys.

expert reply by: Conner L

0

Answer 1

To replace the key for your Sears Sports 20-V Cargo Box with 014 stamped onto the lock core you just need the Replacement Key #THKEYN014. Thule is who made/makes the Sears boxes. This will include 1 keys so I recommend ordering a couple so you can…

view full answer...

Answer 2

In order to get the correct replacement key for your Sears Sport 20-SV Cargo Box you will need to look on the lock core for a three digit number. Once you have this number you can then search on our site for part THKEYN###with the ###being the number…

view full answer...

Answer 3

Your axles being under the leaf springs will not change the hanger location recommendations listed for the Single Axle Hanger Kit part #APS4. You would want to have the hangers 25-3/4 apart measured on bolt center. However, since your axles are below…

view full answer...

Answer 4

If the measurements on your trailer match the 4-Leaf Double-Eye Spring, part #e54SR or part #e28SR, they will bolt up to your trailer. My contact informed me that the heavier 4-Leaf Double-Eye Spring, part #e28SR will work, but it will give you a…

view full answer...

Answer 5

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 6

What I recommend, if the trailer has round axles, is an over-under conversion kit. For 3 inch round axles use #K71-385-00 and for 2-3/8 inch round axles use #K71-384-00. This of course will only work if the leaf springs are mounted to the bottom of…

view full answer...

Answer 7

To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Replacement Key for a Sears Sport 20-SV Cargo Box with 014 Lock Code

Product Page this Question was Asked From

Continue Researching