Will the Front Mount Trailer Hitch for a 2007 Toyota Tundra Work with a Bull Bar/Brush Guard

Question

Question:

Hi, I was wondering if the Drawtite front bumper hitch will fit on my 2007 Toyota Tundra if I have a Brush guard in place. When mounting the brush guard I removed the tow hooks so the hitch would have to fit into the same position. Overall looks like it would fit just wanted some feedback on it thanks

asked by: Stanley R

0

Expert Reply:

In order to install a front mount trailer hitch on a 2007 Toyota Tundra like the Draw-Tite Front Mount Trailer Hitch Receiver part # 65080 which is what I recommend you'll need to remove any existing bush guard or bull bar. The reason for this is because the two almost always use the same mounting holes for installation. That said, this is the case for almost every vehicle not just a Toyota Tundra.

The front mount trailer hitch is going to be much more functional than a bull bar or brush guard so this will be the best option.

expert reply by: Conner L

0

Answer 1

I do have both front mount hitch and grille guard options for your 2017 Toyota Tacoma TRD Off Road but as you mentioned they cannot be used together and I am not aware of any grille guards that have an integrated receiver tube. Therefore, you will…

view full answer...

Answer 2

The biggest difference between the Curt front hitch part #31198 and Draw-tite front hitch part #65080 is that the Draw-tite receiver tube extends out more than the Curt by over an inch. This makes it more visible when nothing is mounted to it.…

view full answer...

Answer 3

I was able to get the measurements you were looking for of the Draw-Tite front mount hitch that fits your 2020 Toyota Tundra, which is the following: - Draw-Tite Front Mount Trailer Hitch Receiver #65080 The hitch is similar to the Curt #31198 in…

view full answer...

Answer 4

For your 2018 Toyota Tundra we have the Curt front hitch part #31198 and the Draw Tite part #65080 both as a confirmed fit and both really good options. Both install the exact same and have same capacities, but I like the Curt better as it's made…

view full answer...

Answer 5

On the Curt front mount receiver #31198 there is a note stating that the skid shield will either have to be removed or you can trim it and reinstall in on your 2018 Toyota Tundra. For the Draw-Tite receiver #65080 we have a note stating that the skid…

view full answer...

Answer 6

You can use a bike rack in the Draw-Tite Front Mount Trailer Hitch #65080 although this is a 2" hitch so you would not be able to use a bike rack with 1-1/4" shank; you would need a bike rack for a 2" hitch like the Thule T2 Pro XTR…

view full answer...

Answer 7

The front-mounted trailer hitch receiver with the best clearance for your 2013 Chevy Suburban 1500 is the option from Draw-Tite: - Draw-Tite Front Mount Trailer Hitch Receiver #65052 The receiver on the Draw-Tite #65052 is a couple inches closer to…

view full answer...

Answer 8

I checked with Pop & Lock for you and there is a system that they have confirmed will work with 2011 and newer Leer 100XL, Leer 100XQ, and Leer 700: - Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers #PAL9772

view full answer...

Answer 9

Starting with the tow hooks, those will remain on your 2020 Toyota Tundra when installing the Draw-Tite Front Mount Trailer Hitch Receiver #65080. They will be temporarily removed, but will be bolted back on. In regards to the hole, there is a small…

view full answer...

Answer 10

The Draw-Tite Front Mount Trailer Hitch #65080 that fits your 2016 Toyota Tundra has a vertical load limit (the front mount hitch version of tongue weight) of 500 lbs; you can use this hitch and tow your trailer at the same time so long as your…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Will the Front Mount Trailer Hitch for a 2007 Toyota Tundra Work with a Bull Bar/Brush Guard

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching