Which has the Larger S Hook Size EM34420 or 34414

Question

Question:

We already have some of the cam buckle straps part number EM34409 and really like the larger S hook size. Id also like to get some Erickson ratcheting straps. Do the 1inch wide EM34420 or 2inch wide 34414 ratcheting straps have the larger S hook like the EM34409 cam buckle strap?

asked by: Ken R

0

Expert Reply:

Of the two the Erickson Re-Tractable Ratchet Straps w/ Push Button Releases part # 34414 are going to be the way to go. They are going to have very similar hooks in size to the Cam Buckle Straps part # EM34409 that you like so much. I have included a video for you to check out to see them in use and get a feel for the hook size.

expert reply by: Randy B

0

Answer 1

The Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 2" x 6' - 1,333 lbs - Qty 2 #34414 has a measurement of 19-3/4 inches from inside the hook to inside the opposite hook when fully retracted. The measurement from…

view full answer...

Answer 2

I contacted the manufacturer about the issues you are experiencing with your Erickson Re-Tractable Ratchet Straps #34414. They were able to provide the below troubleshooting steps: "Unfortunately, there is no real way to “reset” the spring…

view full answer...

Answer 3

Yes the Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 1" x 6' - 500 lbs - Qty 2 #34413 you were looking at would be a great option for securing the rear of your 19' boat to your boat trailer as long as it is…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

For the 205R16 tire on your Land Rover you can use the Rightline Gear Spare Tire Cover - 27" to 35" Diameter #RG87VR.

view full answer...

Answer 6

It looks like the Single Rocker Switch #37213685 will fit your needs. It is a 3-prong switch that has an on/off function. So it will be on when switched to the top and off when switched to the bottom. There would be no 3rd/middle stopping point.…

view full answer...

Answer 7

Yates has told us in the past that their keel rollers like the part #YR800Y have a 400 lb weight capacity.

view full answer...

Answer 8

The mounting plate on the Fulton Single Speed Trailer Winch #F142201 is 5-3/8" long and 3-9/16" wide. The total height of the unit is 6-1/8" tall. I've also linked our review video for this winch that gives the…

view full answer...

Answer 9

The correct lug nut torque for any given trailer wheel depends on a few things. You can refer to the linked diagram that provides a range of values depending on the factors like stud size and wheel material. For 1/2-inch studs with coned lug nuts…

view full answer...

Answer 10

The part #HSE7K-T1SO comes with rotors that slip over idler hubs and the #HSE7K-T1 instead comes with rotors that are integrated into hubs. So it's totally different applications based on the style of hub that the trailer has.

view full answer...

Answer 11

The only difference between the HydraStar Disc Brake Kit with Actuator for Tandem Axle Trailers - 7K part #HSE7K-T1SO and part #HSE7K-T1 is that the latter comes with the hub which is integrated into the rotor. The former does not come with a hub…

view full answer...