Jensen jwm45 Doesn't Pick Up AM and FM Signals.

Question

Question:

I can’t get the am, fm to work it has just static

asked by: Robert’ P

0

Expert Reply:

It is likely that your antenna has disconnected from the back side of the unit. There are a couple of options available lie the Jensen Amplified Antenna 7' Cable part # AN150SR or the Jensen In-Wall Antenna 6' Long part # AN140 should you not have one already there for some reason.

expert reply by: Randy B

0

Answer 1

Yes, the Jensen RV Stereo - Double DIN - HDMI, AUX/USB, Bluetooth - 48W - 2 Zone - 12V #JWM45 is designed to be wired directly to your speakers. I've attached the wiring diagram from the owner's manual to help assist you in this process.…

view full answer...

Answer 2

The reason the Jensen Mechless RV Stereo JWM30 is in the videos for the #JEN25RR is because they are the same stereo. JWM30 is the Jensen part number and #JEN25RR is the etrailer part number so there is no difference between them.

view full answer...

Answer 3

In regards to the Jensen RV Stereo part #JWM45, there are two zones each of which can support two speakers for a total of four. The zones can be cycled through using the zone buttons on the faceplate or wireless remote. It will not hurt the system to…

view full answer...

Answer 4

RV stereo manufacturers for some reason love to change the wiring harnesses between models so since you'll have to splice wires together anyway you may as well go ahead and go with another Jensen stereo since you prefer them. The closest option…

view full answer...

Answer 5

There won't be any harm at all to your system by replacing your Jensen AWM914 that has 24 overall watts with the Jensen RV Stereo - Double DIN - HDMI, AUX/USB, Bluetooth - 48W #JWM45. The watts is just the maximum available so it won't give…

view full answer...

Answer 6

I was able to contact resources on your behalf to confirm answers for your question. Yes the USB port can play music from a USB flash drive but only wmpa and wma formatted files. Yes you can play all four speakers at the same time when wired…

view full answer...

Answer 7

Yes, the volume of the different zones of the Jensen RV Stereo part #JWM45 are independently adjustable.

view full answer...

Answer 8

To determine the correct replacement speakers for your trailer you'll need to remove one from the wall and measure the cutout hole. From there we would just pick out speakers that match the cutout hole so that you don't need to make any…

view full answer...

Answer 9

I contacted our Tech Rep for verification regarding your question on the Jensen RV Stereo, #JWM45. They confirmed that yes, you can do this as the #JWM45 has HDMI ARC (Audio Return Channel), but please remember that means the TV itself needs to…

view full answer...

Answer 10

Thanks for reaching out! If the HMDI port on the back of the Jensen RV Stereo #JWM45 doesn't seem to be communicating properly with your Phillips TV then there are a handful of things to check: 1. Check the HDMI cord with 2 things that you know…

view full answer...

Answer 11

The screw holes for the Jensen Marine Speakers #MS5006BR are 3-3/4" from side to side or top to bottom and 5-1/2" diagonally.

view full answer...

Answer 12

The Jensen RV Stereo part #JWM45 is a double din stereo which requires a cutout size of roughly 7-3/8 wide x 3-1/2" tall. The cutout can be larger than this yes but not larger than 8-3/16" wide x 3-3/8" tall as that is the size of the…

view full answer...

Jensen jwm45 Doesn't Pick Up AM and FM Signals.

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching