Replacement Rear Ladder for my 2005 Winnebago Vector

Question

Question:

I need a rear replacement ladder for a 2005 winnebago vector class A rv

asked by: David

0

Expert Reply:

We have several replacements available for you and the difference in them is length and color. I will list the options for you here. If you could provide me with the length of your current ladder I could offer an opinion on which I would pick. If yours is missing or damaged so much the measurement is inaccurate remember when choosing the lengththat about 12" of it will be above the roof so add that.

The shortest is the Surco Universal Exterior RV Ladder - 84-1/2" - 250 lb - Long part # SP502L

Next is the Surco Universal Exterior RV Ladder - 97" Long - 250 lb # SP501L
-this one is hinge and will work fot flat or contoured rear ends

These next two are identical with exception of color these are both also hinged for flat or contoured rear ends
Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" T x 12" W - 250 lb.

Black part # LA-401BA
Silver part # LA-401

expert reply by: Randy B

0

Answer 1

The height listed for the RV ladders we offer doesn't include the height of the return, or the 'hook' portion at the top of the ladder. In the case of the #SP502L RV Ladder, the overall height is 84-1/2-inches and from mounting surface to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

For an RV ladder that has a hinge half way up the ladder we have the Stromberg Carlson #LA-401 which would work well for you. The hinge allows the lower portion to fold like you are wanting so that it can match an angled RV wall like in the picture I…

view full answer...

Answer 4

We do offer a range of RV exterior ladders that are general-purpose replacements that will work on many trailers and RVs, but none of these is a custom-fit item intended as an exact OEM replacement for any particular unit. RV makers may change ladder…

view full answer...

Answer 5

I went out to our warehouse to get these measurements for the Replacement Bottom Ladder Section #SU77VR. These have an overall length of 36" with the two 7/8" inserts spaced 11" on center. The 7/8" is the outer diameter of the…

view full answer...

Answer 6

If your original ladder was 84-1/4 inches long, the Surco Universal Exterior RV Ladder #SP502L would work well for you. I don't have access to any reference material that would tell me which ladder would have originally been used on your 1999…

view full answer...

Answer 7

We do not recommend to modify the Surco Universal Exterior RV Ladder #SP502L to fit your camper as it may compromise the structural integrity of the ladder. However, if you choose too, you should be aware that the steps are welded to the frame of the…

view full answer...

Answer 8

Each of the motors of the Happijac Electric Truck Camper Jack System #LC736515-ELKIT is protected with a 25 amp fuse. So it can pull right up to 25 amps.

view full answer...

Answer 9

Yes. You can replace the Progressive Dynamics PD4590K18NS2 with the Replacement Converter Section for Progressive Dynamics 4500 Series RV Power Control Center - 90 Amp #PD4590CSV without any issues. Both are 90 amp converters from the same Series and…

view full answer...

Answer 10

We offer three choices in an exterior roof ladder for your Jayco trailer. These can be seen by clicking on the link provided. We offer both straight and contoured ladders to fit both types of trailer exterior and three choices in ladder height,…

view full answer...