Recommended Adapter To Adapt Roadmaster Falcon 2 To Demco Baseplate On 2019 Jeep Wrangler

Question

Question:

I purchased the Demco base plate DM9519336 for my 2019 Jeep Wrangler and my friend gave me the Roadmaster falcon 2. I did not realize I couldn't use the tow bar with the base plates, i thought they all worked together.

asked by:

0

Expert Reply:

Most tow bars and base plates for flat towing your vehicle behind a motor home are brand specific but the great thing about Demco base plates like part # DM9519336 is their versatility. You can use the adapter part # DM9523036 to adapt the Falcon 2 Tow bar part # RM-520 to the Demco base plate.

You would simply remove the existing ends of the tow bar and replace them with the adapter with the included hardware.

expert reply by: Heather A

0

Answer 1

Since Roadmaster does not offer a direct connect base plate kit for your 2014 Ford Edge that tells me you have either the Demco #DM9519210 or Blue Ox #BX2628. The easiest way to tell the difference between these two is the bracket for the safety…

view full answer...

Answer 2

Yes, the Roadmaster Sterling tow bar can be adapted to fit with Blue Ox base plate kits. The adapter needed does depend on the serial number of the Sterling. If the tow bar's serial number is 16,500 or less use #RM-031. If the serial number is…

view full answer...

Answer 3

The serial number of your Sterling tow bar being 607,928 would indicate that the #RM-031-5 would work with it and would be the correct fit. The #RM-031 is for the older version like you mentioned.

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 7

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 8

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 9

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 10

Hello Curtis. You can absolutely use an RV mount tow bar with your 2006 Ford E350 Van. For example, the Blue Ox Avail Non-Binding Tow Bar #BX7420 is compatible with any 2" hitch receiver. This could be on a motorhome, van or pickup truck. As…

view full answer...

Answer 11

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 12

Hey Ken, so the first thing you will need is a base plate kit like the Blue Ox part #BLU85CR which fits your 2023 GMC Canyon and would be compatible with your Blue Ox tow bar. I do not know what braking system you had in the past but for a permanent…

view full answer...

Recommended Adapter To Adapt Roadmaster Falcon 2 To Demco Baseplate On 2019 Jeep Wrangler

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching