What are the Functions of the Lights for Trailer Wiring 4 Pole Flat LED Tester # I26

Question

Question:

There are no instructions about what the lights on I26 should be for a correctly wired and fully functional 4-wire adapter. What do the 3 lights indicate?

asked by: Bruce

0

Expert Reply:

From left to right the first light tests running lights, the middle light tests left turn and brake lights, and the last light tests right turn and brake lights. On a 4-Way flat vehicle connector, the one exposed pin is the ground, next to that is running lights, then left turn and brake, and the last pin is right turn and brake.

expert reply by: Michael H

0

click to enlarge

Answer 1

The jacketed circuit is the ground. The one right next to that one is the tail light circuit, next to that one is the left turn circuit. And then the last one on the end is the right turn circuit. Check out the picture I attached to see the circuits…

view full answer...

Answer 2

It sure does; I can verify for you the Curt hitch does indeed fit your 2022 Honda CR-V Touring Hybrid. I have also added a cut out for you from a customer review which mentions installing this hitch on the exact same model. So the hitch will fit your…

view full answer...

Answer 3

When installing a hitch like the etrailer #e98848, you may or may not need the sensor relocation kit; we've seen some customers that have reported that the hands-free lift gate still works but that it requires touching a very specific spot and…

view full answer...

Answer 4

As of April 2023 we have not yet had a chance to install the #C13397 on a 2023 Honda CR-V. However, we have installed this on a 2022 which will be the same process. I have attached the installation video below, along with the written instructions for…

view full answer...

Answer 5

For your 2018 Honda CR-V the Curt trailer hitch part #C13397 is the hitch I recommend as only the hitch opening will be visible under the rear bumper of the vehicle and because it has great towing capacities. What you'll need to do is remove the…

view full answer...

Answer 6

I verified directly with Curt for you that the correct 4-way wiring harness is following: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56370

view full answer...

Answer 7

The Curt hitch part #C13397 that you referenced is a confirmed fit for the 2022 Honda CR-V hybrid Touring model.

view full answer...

Answer 8

The etrailer Trailer Hitch Receiver part #e98848 which is what I recommend for a 2020 Honda CR-V will block the hands free lift gate sensor. That said, all of the trailer hitch options for a Honda CR-V will block the hands free lift gate sensor but…

view full answer...

Answer 9

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #75908 fits with the spare shown in the included picture. But if your spare is the exact same size as the other 4 tires on the 2016 Kia Sorento then fit is not…

view full answer...

Answer 10

We do have a wiring harness for your 2023 Hyundai Palisade. I recommend the Curt T-Connector #C43FV. This will plug in behind the driver and passenger side tail lights, and will not require any cutting of the vehicles harness. You will have to run a…

view full answer...

Answer 11

The Curt T-Connector Vehicle Wiring Harness #C43FV is custom fit for your 2023 Hyundai Palisade. This has OEM style connectors to connect to your tail light wiring harness. It will give you a 4-way flat but will require running a power wire to the…

view full answer...

Answer 12

The Curt T-Connector Vehicle Wiring Harness #C43FV is custom fit for your 2023 Hyundai Palisade. This uses the factory style connectors used on the tail lights for your Palisade so you will not have to splice any of your trailer wiring. It does…

view full answer...

What are the Functions of the Lights for Trailer Wiring 4 Pole Flat LED Tester # I26

Product Page this Question was Asked From

Continue Researching