Will Draw-Tite Trailer Hitch 75908 Fit a 2016 Kia Sorento with Full Size Spare Tire

Question

Question:

Will the Curt Hitch for the 2016 Kia Sorento #75908 support a full sized spare tire when installed? My vehicle came with a full sized rim and tire as spare.

asked by: Dwayne

0

Expert Reply:

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 75908 fits with the spare shown in the included picture. But if your spare is the exact same size as the other 4 tires on the 2016 Kia Sorento then fit is not confirmed and the spare might have to be carried elsewhere.

expert reply by: Michael H

0

click to enlarge

Answer 1

From left to right the first light tests running lights, the middle light tests left turn and brake lights, and the last light tests right turn and brake lights. On a 4-Way flat vehicle connector, the one exposed pin is the ground, next to that is…

view full answer...

Answer 2

The Draw-Tite #75908 is more hidden with the recessed aspect of the hitch pin hole being 5-1/2 inches from the outermost part of the bumper. The height is 15-1/2 inches from the inside top of the receiver to the ground. The Curt #C13195 is very…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

We do offer a hitch that will fit the 2023 Toyota Highlander XLE. Basically any hitch listed under "excluding XSE" is going to fit the XLE model. For you I recommend the EcoHitch Class 3 Trailer Hitch #EH35VR. The main reason I prefer this…

view full answer...

Answer 5

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 6

A tow package for your 2007 Hyundai Santa Fe could be a frame mounted trailer hitch and trailer wiring harness. If you have either or both of those two things you could pretty easily assume you have the tow package. Another option you have is to take…

view full answer...

Answer 7

The best trailer hitch for a 2020 Hyundai Santa Fe is the Draw-Tite Trailer Hitch Receiver #75908 because it an easy, bolt-on installation, provides the most ground clearance of any hitch for your Santa Fe and has a tab which will let you very easily…

view full answer...

Answer 8

For your 2019 Hyundai Santa Fe I recommend the Curt Class III Round Tube Receiver Hitch #C13195. This Class III hitch is confirmed to fit your Santa Fe and it will use existing holes in the vehicle's frame for a no-drill installation. It will…

view full answer...

Answer 9

I checked with Curt and the hitch part #C13195 that you referenced does not have any fit exclusions for versions of the vehicle that have a full-sized spare so it will fit and work well. I attached a picture to this page that shows it installed with…

view full answer...

Answer 10

If you've broken or lost any of your hardware when installing your hitch all you need is to go to part #RHK, type your hitch item number in and select the manufacturer. This will give you a complete hardware kit to replace yours. You can buy a…

view full answer...

Answer 11

For your 2016 Kia Sorento the Draw Tite hitch part #75908 that you referenced will allow you to store your 18 inch diameter spare tire with the hitch installed. I checked the install notes and there are no restrictions for use with full sized…

view full answer...

Will Draw-Tite Trailer Hitch 75908 Fit a 2016 Kia Sorento with Full Size Spare Tire

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching