High Towing Capacity Trailer Hitch Recommendation for 2020 Ram 1500

Question

Question:

Is there one to pull heavier than 6,000lbs? Trailer/camper

asked by: Mike

0

Expert Reply:

We do have a trailer hitch that fits your 2020 Ram 1500 that has a much higher towing capacity with the Curt item # C15005 which has the towing capacity of 17,000 lbs. This is a frame mounted design that's much more heavy duty overall. It still is mostly concealed when installed like you can see in the attached install picture.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I checked with Curt, and the Curt Trailer Hitch Receiver #C13419 fits all models of 2019 Ram 1500 that have the Class III factory bumper hitch. So as long as your '19 Ram 1500 Warlock has that bumper (see photo for reference) then yes, it…

view full answer...

Answer 2

For your 2021 Ram 1500, I'd recommend the Curt item #C15005 Class V hitch. According to Curt, the hitch is compatible with all models of the 2021 Ram 1500, including your Warlock trim level. The hitch has a 15000 lb towing/1700 lb tongue…

view full answer...

Answer 3

For your 2019 Ram 1500 without the factory hitch we do have a hitch that is rated for use with weight distribution with the Draw Tite part #C15005 but the Curt #C13419 that you referenced is not rated for use with a WD system due to how it installs…

view full answer...

Answer 4

The Curt hitch part #C15005 does fit your 2019 Ram 1500 that has the factory Class III hitch but you will need to remove the factory hitch you have now for this to fit. Essentially this replaces the factory hitch and bumper beam which is why the…

view full answer...

Answer 5

2020 was a split model year for the Ram 1500, with two distinct models that use different hitch fits, the Ram 1500 Classic which is a carryover of the 2019 model or the all-new 2020 Ram 1500. If you have the 2020 Ram 1500 Classic, the #14374…

view full answer...

Answer 6

I took a look in the owner's manual for a 2019 Ram 1500 and it states that the towing capacity with the bumper hitch is 5,000 lbs. If you don't already have one, the Curt Trailer Hitch Receiver part #C13419 is what I recommend which attaches…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...

High Towing Capacity Trailer Hitch Recommendation for 2020 Ram 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching