What is Overall Height of SumoSprings Solo Custom Helper Springs # SSR-114-54

Question

Question:

What is the overall height of these? I have a 2016 F350 4x4 with modified rear suspension add-a-leaf but shorter block under the spring, so I want to see where these are going to sit in terms of the height before they engage.

asked by: John

0

Expert Reply:

The SumoSprings Solo kit # SSR-114-54 measures 5 inches including the bracket according to our contact at SuperSprings. They are designed not to be engaged when you are without load but also to progressively control load as they compress since they get stiffer the further they are compressed.

expert reply by: Jameson C

0

Answer 1

The SumoSprings Solo Custom Helper Springs, part #SSR-114-54 are designed to be able to cushion the ride of your 2016 F-250 truck when you are carrying loads, and should do a nice job for you.. They are progressive so they compress as more weight…

view full answer...

Answer 2

The correct SumoSprings Solo Custom Helper Springs for a 2016 Ford F-250 is part #SSR-114-54. The SumoSprings will do a great job of reducing rear squat while towing or loaded but no suspension enhancement system would guarantee to completely…

view full answer...

Answer 3

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 4

There is jounce spring suspension enhancement for your 2004 Ford F-350 but the Firestone WorkRite has been discontinued for some time now. For jounce-style spring suspension on your '04 F-350 similar to the WorkRite I recommend the…

view full answer...

Answer 5

You can totally handle the install of the SumoSprings Solo Custom Helper Spring Kit #SSR-114-54 in your 2008 F-250 4WD that has the B&W gooseneck hitch installed. The USA-made #SSR-114-54 is a bolt-on kit that needs no drilling. You'll simply…

view full answer...

Answer 6

For your 2020 Ford F-250 Super Duty there are two SumoSprings options that fit your truck like you mentioned. There's the 2,800 lb kit part #SSR-114-54 and the 1,500 lb kit part #SSR-114-54. Basically you want to go with the lightest duty kit…

view full answer...

Answer 7

I have a solution for you, but the Sumo Springs are only sold in pairs, so you would need to purchase a complete kit using part #SSR-114-54. While failure of these is fairly unlikely, they can get damaged occasionally and need replacement, so doing…

view full answer...

Answer 8

Since that's a lot of weight for the bed of your 2000 Ford F-250 I would recommend the higher capacity SumoSprings Rebel part #SSR-101-47-2 which has a 5k capacity. This is going to do a great job of reducing sag and improving stability and…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...