Does the EcoHitch for the 2017 BMW X5 Require Fascia Trimming?

Question

Question:

Does this hitch require any fascia trimming on a 2017 X5? I saw a comment that Cutting is required on a 2016 model and do not want to cut the fascia on my 2017.

asked by: Scott H

0

Expert Reply:

I reached out to the folks over at EcoHitch and the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - Class III - 2"
part # 306-X7265 that you looked at will not require you to cut the rear fascia on your 2017 X5. This hitch also has a removable receiver tube opening so when not in use will not affect the look of your X5 at all.

If you need wiring the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector part # 119250KIT is a solid choice and it also doesn't require any cutting or splicing of the wiring unlike most others available for your X5. It has sensor that clip around the wiring to get the signals rather than actually having to tap into them. I've linked this below as well as an installation video my buddy Rob did here at etrailer.

expert reply by: Randy B

0

Answer 1

We have a version of the EcoHitch that fits your 2016 BMW X5 that was designed for versions of the vehicle that have the backup sensors with part #EH44FR. This would be your best option and gives you ability to remove lower hitch opening when not…

view full answer...

Answer 2

The EcoHitch #306-X7265 and #EH44FR have one real difference between them. The #EH44FR is designed for vehicles with a backup sensor and the #306-X7265 is designed for vehicles without a backup sensor. Outside of this and a slight difference in…

view full answer...

Answer 3

The EcoHitch part #306-X7265 that fits your 2016 BMW X5 does have a 750 lb tongue weight capacity. At one point it was listed differently but we have confirmed for sure that this has the 750 lb tongue weight capacity.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 8

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

view full answer...

Answer 9

The best hitch for your 2023 Honda Passport is going to be the Curt Hitch item #C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it tucks up underneath your rear bumper cover nicely…

view full answer...

Answer 10

Since your 2024 Toyota Grand Highlander doesn't come with the factory tow package you need the Curt T-Connector Vehicle Wiring Harness #C79VV. The module plugs into that 10-Pin connector you found under the cup holder and then the 4-Way harness…

view full answer...

Answer 11

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...