Pace Edwards Rig Rack Contractor's Aluminum Ladder Rack for 2019 Ford F-150 w/ 5-1/2 Foot Bed

Question

Question:

Will this work on a 2019crew cab 5.5foot bed f150

asked by: Tim H

1

Helpful Expert Reply:

Pace Edwards does have a Contractor's Rig Rack that fits your 2019 Ford F150, but the # 311-CR6008 isn't a fit.

The correct fit for your F150 would be part # 311-CR3009. The ladder rack attaches to the vehicle using the Pace Edwards Explorer rail system that's incorporated into their tonneau covers like the # 311-JEFA05A28 Full Metal JackRabbit Hard Tonneau Cover. The tonneau cover features a rail system along the edge of the bed rail, and is only compatible with F150 models NOT equipped with the Bed Cargo Management System.

expert reply by: Mike L

1

Answer 1

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part…

view full answer...

Answer 2

I recommend the RetraxONE XR Hard Tonneau Cover #RTX72GR for your 2024 Ford F-150. This is one of my favorite tonneau covers as it is constructed using matte black polycarbonate slats which are not going to scratch like aluminum painted tops or…

view full answer...

Answer 3

I checked with Pace Edwards and the Contractor Rig Rack part #311-CR4008 is a confirmed fit for your 2008 Ford F-250 Super Duty with a 6-1/2 foot bed and not the part number you mentioned.

view full answer...

Answer 4

The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR4008 requires a tonneau cover with t-slots like the Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails #311-JEFA05A28 in order to mount. According to Pace…

view full answer...

Answer 5

The difference between these Pace Edwards contractor racks is simply just fitment. The bed width can vary depending on the year/make/model of the vehicle so each of these will only fit specific vehicles. Since you have a 1996 Ford F-250/350 listed as…

view full answer...

Answer 6

Hi Mike, The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR6007 mounts into the track of the cover so from the manufacturer's standpoint you would need the cover in order to use the rack. There aren't currently any clamps…

view full answer...

Answer 7

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 10

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 11

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 12

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...