Which Pace Edwards Contractor Rig Rack Fits 2008 F250 Super Duty with 6.5’ ft Bed

Question

Question:

Will this ladder rack fit the truck? 2008 F250 Super Duty. 6.5’ bed with a crew cab

asked by: Mike H

0

Expert Reply:

I checked with Pace Edwards and the Contractor Rig Rack part # 311-CR4008 is a confirmed fit for your 2008 Ford F-250 Super Duty with a 6-1/2 foot bed and not the part number you mentioned.

expert reply by: Jameson C

0

Answer 1

It is; the BAKFlip MX4 Hard Tonneau Cover #BAK48121 that fits your 2015 GMC Sierra 1500 is indeed compatible with the TracRac SR. The reason why is the MX4 installs inside your Sierra's bed rails, leaving the top free, and the TracRac installs on…

view full answer...

Answer 2

There's only one tonneau cover that can fit with the Thule TracRac SR Sliding Ladder Racks like the part #TH43003XT-785 which fits your 2017 Ford F-250 short bed and it's the BAK Revolver part #BAK22VR as it is the only cover that installs…

view full answer...

Answer 3

Thanks for reaching out! It looks like there is a bit of a gap between the forwardmost crossbar and the Cantilever Extension #TH24001XT when it's installed. Thule states that the forwardmost bar isn't needed and the load can be secured by the…

view full answer...

Answer 4

I have a solution for you, however part #INBRP9 is a replacement part and not intended to fit to a ladder rack. Instead, you'll need to get part #INBRP12, which will fully replace the mounting hardware on an Inno Shadow, Wedge or Stream cargo box…

view full answer...

Answer 5

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 6

There is a solution which is going to help save your kayaks from any further damage. To mount them on your TracRac TA27000-01 I recommend using the Malone Foam Kayak Block #MPG159. These are going to fit directly over the four-inch bars on your…

view full answer...

Answer 7

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 8

Pace Edwards does have a Contractor's Rig Rack that fits your 2019 Ford F150, but the #311-CR6008 isn't a fit. The correct fit for your F150 would be part #311-CR3009. The ladder rack attaches to the vehicle using the Pace Edwards Explorer…

view full answer...

Answer 9

Hi Mike, The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR6007 mounts into the track of the cover so from the manufacturer's standpoint you would need the cover in order to use the rack. There aren't currently any clamps…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

I recommend the RetraxONE XR Hard Tonneau Cover #RTX72GR for your 2024 Ford F-150. This is one of my favorite tonneau covers as it is constructed using matte black polycarbonate slats which are not going to scratch like aluminum painted tops or fade…

view full answer...

Answer 12

The difference between these Pace Edwards contractor racks is simply just fitment. The bed width can vary depending on the year/make/model of the vehicle so each of these will only fit specific vehicles. Since you have a 1996 Ford F-250/350 listed as…

view full answer...

Which Pace Edwards Contractor Rig Rack Fits 2008 F250 Super Duty with 6.5’ ft Bed

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching