2 inch Trailer Hitch Bike Rack Recommendation for a 60 Pound Slipstream Electric Bike

Question

Question:

I have a new ladies slipsteam electric bike which I want to put on a 2 HITCH. Weight about 58lbs. Is there anything which will work with this product please

asked by: Wenda F

0

Expert Reply:

I have found a solution for your new Slipstream Electric Bike. Take a look at the Thule T2, # TH83JV. This rack has a 60 pound single bike capacity, so it can hold the weight of your electric bike.

expert reply by: Renee B

0

Answer 1

The best option we have for an RV approved 2" hitch receiver 4-Bike rack is the Thule Range #TH9057. This is has been rated and approved for use with anything from a small passenger vehicle up to a travel trailer (which has the harshest…

view full answer...

Answer 2

The biggest change between the Thule T2 Pro and Pro XT #TH83JV is the distance between the bikes. Originally the T2 Pro was designed to work with Fat bikes right out of the box. The only issue was people had a hard time getting 2 Fat bikes to fit…

view full answer...

Answer 3

We have a handful of 2" hitch mount bike racks from Thule, but only certain ones have been tested and approved for use on a motorhome so it does narrow down the list a little bit. If you have bikes without front fenders then the best option is…

view full answer...

Answer 4

Yes. You absolutely, positively, without any shadow of a doubt MUST use Swagman Bike Frame Adapter Bar #64005 with your Trek Marlin 6 & 7 bikes on either the Yakima LongHaul #Y02476 or Thule Range #TH9057. As for the racks themselves, I would go…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

Only certain bike racks are rated for use at the back of an RV or trailer but the Hollywood Racks #HR1400Z bike rack is not one of them. Generally, any rack that can fold or tilt, with few exceptions, won't be rated for this applications. The…

view full answer...

2 inch Trailer Hitch Bike Rack Recommendation for a 60 Pound Slipstream Electric Bike

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching