Does Curt Multi Fit Hitch Fit 2008 Town and Country with Stow and Go Seats

Question:

Does a Curt c13900 multi fit hitch fit a 2008 Chrysler Town and country LX with stow and go rear seats?

asked by: Bill

Helpful Expert Reply:

For a Class III hitch that is confirmed to fit, the etrailer Trailer Hitch Receiver # e98854 is a great option. It's rated at 400 lbsb TW, and 4,000 lbs GTW. It can also be used with weight distribution, which raises the TW to 500 lbs, and the GTW to 5,000 lbs.

The Curt Multi Fit Trailer Hitch Receiver # C13900 is not confirmed to fit you 2008 Chrysler Town and Country because of the Stow and Go seats. There is a note saying "excluding" Stow and Go, but the etrailer # e98854 has very similar weight capacities and is custom designed for your Town and Country.

The installation is very straight forward. It uses all factory hardware and doesn't require any drilling. I found when I installed the hitch it was not necessary to trim anything, it sat really close to the bumper and the cross tube was completely hidden.

If you're going to be towing and need to complete your set up I recommend the following :

For wiring the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118552 so you can get the light signals to your trailer. It's a plug and play design, so there's no cutting any factory wires, just plug the connector in line with the tail light harness.

For a ball mount the etrailer Ball Mount Kit for 2" Hitches # 989900 comes with 2 mounts, 2 hitch balls, and the pins and clips to secure them.

I have linked all the parts mentioned, a few videos a help article explaining how and where to measure for a ball mount to match up to your trailer.