Yakima Fullback 3 for a 2020 Toyota Rav 4

Question

Question:

Will theYakima Fullback 3 bike carrier work for my Rav 4?

asked by: David C

0

Expert Reply:

The Yakima Fullback 3 # Y02633 is a confirmed fit for your 2020 Toyota Rav 4. This 3-bike trunk rack features a 4-strap mounting system and interlocking HUB for quick setup on your Acura MDX. The adjustable arms have SuperCush anti-sway cradles with ZipStrip straps for easy bike loading. Integrated locks secure bikes and rack.

I have attached a couple of videos for you to see it in action.

expert reply by: Erik B

0

click to enlarge

Answer 1

The Yakima FullBack, part #Y02633 is a great choice and the one that I always recommend. The FullBack has lots of features. It comes with a a 4-strap mounting system and interlocking HUB for quick setup on your Toyota Prius. The adjustable arms have…

view full answer...

Answer 2

Manufacturers prefer to recommend that you do not use the hooks if possible just because they are what most likely causes damage to the vehicle when using trunk mounted racks like the Yakima Fullback 3 #Y02633. This does not always happen but they…

view full answer...

Answer 3

That is correct, you will want to install the top straps of the Yakima FullBack 3 Bike Rack #Y02633 using the anchor method for your 2017 Chrysler Pacifica. I've installed this rack that way a few times and I found it easier to remove the hooked…

view full answer...

Answer 4

Yes, the Yakima FullBack #Y02633 does need to be installed in anchor mode on your 2016 Toyota Prius. This is shown in the instructions which I've linked on this page. Basically, you loop the strap through part of the hook.

view full answer...

Answer 5

Yes, I confirmed with Yakima that the Yakima FullBack 3 Bike Rack #Y02633 will fit your 2008 Subaru Outback Wagon. It will not, however, fit the Sport model. You may also be interested in the Softride Soft Hook-and-Loop Tie Downs #SR54FR to help keep…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Yakima Fullback 3 for a 2020 Toyota Rav 4

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching