Replacement Inno Key Number T262 for Inno Ski Rack

Question

Question:

Need replacement key for ski rack code is T 262 Have not found this listed. help would be appreciated.

asked by: Jon R

1

Helpful Expert Reply:

We have the key you are looking for with the part # IN44FR. This is the Inno key number T262.

expert reply by: Jameson C

1

Answer 1

The distance from the center of the hitch pin hole to farthest part of rack when folded down is 33" on the Kuat #NV22B and 18-1/2" when folded up. Compare that to the Inno #INH120 at 36" when folded down and 14-1/2" when folded…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

I'm sorry to hear about your Jeep. I hope everyone is okay. I checked with Blue Ox and they do not currently have a base plate kit available that is confirmed to fit the 2018 Ford Expedition. It does look like a new generation began for the 2018…

view full answer...

Answer 9

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

view full answer...

Replacement Inno Key Number T262 for Inno Ski Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching