Replacement Shank and Support Bar for a Roadmaster Falcon All Terrain Tow Bar

Question

Question:

Can I buy just the bar that the hitch hooks to for a Roadmaster Falcon All Terrain that fits a 2010 Ford Edge.

asked by: Eddie V

0

Expert Reply:

The front end of the Falcon All Terrain tow bar, # RM-522, is # 910019-20. This is the part that fits in the actual hitch on the tow vehicle.

If you are talking about the bar at the other end that fits between the 2 tow bar arms and attaches to the vehicle that you are towing, it is # 910021-00.

expert reply by: Michael H

0

Answer 1

This is a good question. So it really comes down to preference between the Roadmaster base plate kits that have the crossbar and the ones that do not. The kits like you have #RM-521453-5 without the crossbar are actually reinforced more at the…

view full answer...

Answer 2

Yes, the Replacement Roadmaster Sterling Towbar Shank Assembly #910019-40 is a fit for all of the Roadmaster Sterling models. The current one they have active is the 8K #RM-576 but this same shank/stinger was used on the following discontinued…

view full answer...

Answer 3

The replacement shank you need for your Roadmaster Sterling is the part #9100019-40 that you referenced.

view full answer...

Answer 4

We do have the Complete Repair Kit for Roadmaster Sterling Tow Bar #RM-910003-30 as the Kit #RM910003-85 is for Falcon and Blackhawk tow bars. We also have the following parts if they are damaged and need replaced on your tow bars. Inner Arm…

view full answer...

Answer 5

For your Roadmaster Falcon 2 Tow Bar #RM-520, the Replacement Storage Latch #RMB001353 is most likely what you are looking for. If you are wanting the entire assembly you will want the Replacement Shank Assembly for Roadmaster Falcon 2 and Blackhawk…

view full answer...

Answer 6

There is not a particular winch designated to work with the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 on your 2019 Rubicon JLU with factory steel bumper. That being said, a winch that mounts on the top side of your bumper is probably the…

view full answer...

Answer 7

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Hey Ken, so the first thing you will need is a base plate kit like the Blue Ox part #BLU85CR which fits your 2023 GMC Canyon and would be compatible with your Blue Ox tow bar. I do not know what braking system you had in the past but for a permanent…

view full answer...

Answer 11

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...

Answer 12

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Replacement Shank and Support Bar for a Roadmaster Falcon All Terrain Tow Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching