Dimensions of Replacement BOLT Lock Cylinder for Dodge Key

Question

Question:

Looking at this to replace 2 unique keyed locks on my tonneau cover. What is the overall length of the stem from under silver bezel to tip? And what is diameter of the hole needed to insert? Thanks

asked by: Michael M

0

Expert Reply:

I went out to the warehouse and took some measurements of the Replacement Lock Cylinder # BL692916 for you. The max diameter of the cylinder is about 0.98" and then the max length (up to the bezel) is about 1.70" as you can see in the attached diagram.

expert reply by: Jon G

0

click to enlarge

Answer 1

We have the cotter pin part #165649 which would work great with the Convert-A-Ball Interchangeable Ball Set #900B. This pin is a standard cotter pin like what the ball set uses.

view full answer...

Answer 2

If you have 1/2" wheel bolts then the wheel lock set that you need is part #RG01-150. This comes with 2 locks and 1 key so this would be one set per axle.

view full answer...

Answer 3

Technically yes, the BOLT Spare Tire Lock #BL5922986 will lock onto a boat trailer's spare tire and will hold up to possibly being submerged. The problem you will run into is the lock is designed to fit into the recessed well that you won't…

view full answer...

Answer 4

The Convert-A-Ball Interchangeable Trailer Ball Kits are perfectly safe up to their 10K capacity, just as safe as a standard one-piece trailer ball, so you'll have no worries there. This is without a doubt the type of interchangeable ball I'd…

view full answer...

Answer 5

It sounds like you're looking for the Convert-A-Ball Interchangeable Ball Set - 2" and 2-5/16" Balls - 1" Shank - Nickel #904b. This hitch ball enables you to switch between having a 2" or 2-5/16" hitch ball depending on…

view full answer...

Answer 6

Yes, it will so long as your Ford key looks like one in the picture below. The Replacement Lock Cylinder for BOLT Toolbox Latch item #BLT79FR only works with Bolt tool boxes.

view full answer...

Answer 7

Based on the weight range of Casita travel trailers the best weight distribution and sway control we have would be the Reese Strait Line part #RP66082 which has a tongue weight range of 200-600 lbs and features the best sway control at fighting sway…

view full answer...

Answer 8

The Bolt Lock Core part #BL7023480 is compatible with the key of a 2015 Chevy as long as it looks like the key in the picture. How this works is that when you receive the lock core it is "blank". You will put your key in the core and turn…

view full answer...

Answer 9

I believe you are referring to something like the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers #PAL9555 which adds a power lock to the ARE camper shell on your 2016 Ford F-250. The only other thing that you might be…

view full answer...

Answer 10

If your key looks like any of the keys you see in the attached picture then the Bolt lock cylinder part #BL7023480 would work for you. The fit info for this hasn't been updated for the 2019 trucks but as far as we know it does work with the 2019…

view full answer...

Answer 11

I do have an option for you but we don't carry replacement parts for ARE toppers. Instead, what we can offer is a new electronic lock which will replace the manual lock, the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau…

view full answer...

Dimensions of Replacement BOLT Lock Cylinder for Dodge Key

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching