Replacement Hubs for Haulmaster # 90154 Trailer

Question

Question:

I purchased a Haulmaster #90154 trailer. One of the hubs is warped. Im thinking of replaceing both hubs, because the berarings seem to be an odd ball size. The bearing is marked QYDB 2M 30205/P6 do you stock a hub assembly that would fit?

asked by: Glenn D

0

Expert Reply:

To determine if we have a replacement hub that will be compatible, you will need to use a digital caliper and take some measurements of your existing spindles. If you reply with the B, C and D dimensions you find (as shown in the diagram I provided), I would be happy to try to find hubs that would be compatible with your bearings.

expert reply by: Mike L

0

click to enlarge

Answer 1

The Dexter Trailer Idler Hub Assembly #8-258-5UC1 that you referenced actually uses the same #L44649 inner and outer bearing, which has a 1.063 inch inner diameter. Many trailer hubs though do use different size inner and outer bearings and this…

view full answer...

Answer 2

We often hear of weak customer support and limited spare parts availability with "bargain" trailer manufacturers. I found an online copy of the owner's manual for the Harbor Freight Haulmaster utility trailer model 90154 but…

view full answer...

Answer 3

You will need to disassemble your hub to get the actual bearing numbers. Unfortunately the numbers you gave me don't help identify anything. Check out the video I attached that details how to get the bearings out of a hub so that they can…

view full answer...

Answer 4

The bearing races on a trailer hub, like the Trailer Hub Assembly, part #8-258-5UC1, are removable, they are not built into the hub. I am including a link to a FAQ page on wheel bearings, races, and seals. Also, a link to a video of removing and…

view full answer...

Answer 5

For a Dexter hub 8-258 the correct seal is the part #10-9.

view full answer...

Answer 6

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but…

view full answer...

Answer 9

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 10

On single axle trailers typically you put the hanger spacing right at 1/4 of an inch shorter than the leaf spring length from eye to eye center. So if you were using the leaf spring part #e54SR that you referenced which measures 25-1/8 inches long…

view full answer...

Answer 11

To replace your JVR9000 I recommend the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth #JWM40. It has slightly different dimensions that can be easily fixed using a dash plate. This won't have a monitor to watch your video feeds from so…

view full answer...

Answer 12

Sure thing; the JRV9000R is a double-din stereo so you can replace it with another double din, and for that I recommend the Jensen RV Stereo w/ DVD Player #JWM45. The #JWM45 is a 48 watt stereo that also has the DVD functionality and will fit in…

view full answer...

Replacement Hubs for Haulmaster # 90154 Trailer

Product Page this Question was Asked From

Continue Researching