Do I Really Need To Repack Bearings Every 12 Months If I Have Low Mileage On Trailer
Question:
I see the recommenced interval for repacking wheel bearings is 12k or 1 year. I get the 12k but why every year? Im in a dry climate. My trailer is up on jack stands 90 of the time. I only do about 4K a year. I am at 3400lbs loaded on a 3500lb axle so I am maxing it out there. Im at 8,700 Miles right now after two years. Thanks for any insight.
asked by: John
Expert Reply:
The bearings should really be repacked every 12,000 miles or 12 months whichever comes first even if you are not putting 12,000 miles on the trailer. It still a good idea to routinely repack the bearings every 12 months because the grease breaks down over time regardless of the mileage which can lead to bearing failure. I have attached a couple of helpful articles for your reference.
Product Page this Question was Asked From
LubriMatic Standard-Duty, Lever Action Grease Gun
- Lubricants Sealants Adhesives
- Greasing Tools
- Grease Gun
- 6000 psi
- 14 oz
- LubriMatic
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Deutsche Hydrapro Alpha G Electric Over Hydraulic Brake Actuator Installation
- Video: Review of Deutsche Hydrapro Brake Actuator - Electric-Hydraulic Brake Actuator - DH44FR
- Shop: Hydrapro Alpha G-1600 Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: Hydrapro Alpha G-1200 Electric Over Hydraulic Actuator for Drum Brakes - 1,200 psi
- Shop: Hydrapro Alpha G-1600X Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi - 28.7 oz
- Shop: Hydrapro Alpha G-1000 Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
- Shop: Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 7,000 lbs
- Shop: Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle
- Shop: Replacement Dexter BrakeRite II SD Electric Over Hydraulic Actuator - Vented - 1,500 psi
- Video: etrailer Trailer Brakes AKEBRK-35L Review
- Shop: RV Exterior Lighting
- Q&A: How to Grease a Dexter EZ Lube Axle
- Shop: Suspension Enhancement
- Search Results: sea
- Q&A: Can Old Grease Seals Be Reused When Changing Trailer Bearings
- Search Results: clearance lights
- Video: etrailer Trailer Bearings Races Seals Caps - Seals - GS-2125DL Review
- Video: Review of Dexter Axle Trailer Brakes - Nev-R-Adjust Brake Assembly - 23-464-465
- Video: Air Lift LoadLifter 5000 Rear Axle Air Helper Springs Review
- Video: etrailer Electric Trailer Brake Kit Review and Installation
- Article: Trailer Maintenance Schedule
- Shop: RV Interior Lighting
- Q&A: How Tight Should Castle Nut be on Trailer Hub
- Q&A: How Much Grease is Needed in an EZ Lube Axle
- Shop: Trailer Hitch
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: brkh10a
- Search Results: ez lube hubs
- Search Results: trailer hub kit
- Q&A: What Direction Should Disc Brake Calipers Face
on Lubricants Sealants Adhesives
