Would Epicord 30 Amp Twist Lock Power Inlet - White # 277-000137 in 3-1/4 inch Hole

Question

Question:

The current hole in my 5th wheel is 3 1/4 inches in diameter. Before I order this I want to make sure the hole is not too big and the new item will fully cover the opening. Will it cover the opening? If it is marginal or too small what products do you sell?

asked by: Bobv A

1

Helpful Expert Reply:

The rear portion of the Epicord 30 Amp Twist Lock Power Inlet - White # 277-000137 that you referenced is 3 inches so a hole diameter of 3-1/4 inches would easily work.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

I went out to the warehouse and measured Epicord 30 Amp Twist Lock Power Inlet - Black Item #277-000138 for you. The overall width is 3-1/4 inches. the overall height (lid closed) is 4 inches or 7-1/2 inches with the lid opened straight up. The…

view full answer...

Answer 2

To install the Mighty Cord Replacement RV Power Inlet #A10-30INVP that you referenced requires you to install a 2-7/8 inch diameter hole. That would be the size hole saw you would need.

view full answer...

Answer 3

The Furrion Power Inlet #F30ITSSS that you referenced is designed to fit in a hole that is 2-1/2 inches in diameter.

view full answer...

Answer 4

The Epicord 30 Amp Twist Lock Power Inlet #277-000138 has it's own waterproof cover. The Weatherproof Cover w/ Threaded Ring #A10-30CV is designed to fit a Twist Lock 30 amp connector like the part #A10-30FDT.

view full answer...

Answer 5

If you have a typical hole saw set, then you will want to use a 3" hole saw on the Epicord 30 Amp Twist Lock Power Inlet, #277-000138. The outer diameter of the socket that mounts in the RV wall is 2-7/8 inches. If you wanted to be very…

view full answer...

Answer 6

Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project. For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp…

view full answer...

Answer 7

Yes, the correct replacement lid cover for your MaxxFan Plus Roof Vent w/ 12V Fan part #MA00-04500K (4951KS) is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K.

view full answer...

Answer 8

I did a Google search on the information you found on your brake drums and wasn't able to find anything conclusive regarding a replacement. We offer one 10 x 2-1/4 inch brake drum with a 5 on 5 bolt pattern, part #84556UC3 for a standard or…

view full answer...

Answer 9

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 10

We have a great option in a replacement 45 amp power converter for your ELX-45. I suggest the Progressive Dynamics, #PD4045KA. This is a 2-in-1 AC/DC distribution panel and smart charger that works with lithium-ion, flooded lead acid, AGM, and gel…

view full answer...

Answer 11

The correct replacement equalizer for your 13-104 is TruRyde Curved Equalizer #TREQ104. If you need the kit, you can use the Redline Tandem-Axle Trailer Equalizer Kit #AP233. The upgrade we offer for the 13-104 equalizer is the Dexter E-Z Flex Heavy…

view full answer...

Answer 12

The correct replacement motor for your Kwikee 32 Series Steps is going to be the Lippert Components Kwikee Motor and Screws part #LC379147 that you referenced.

view full answer...

Would Epicord 30 Amp Twist Lock Power Inlet - White # 277-000137 in 3-1/4 inch Hole

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching