Recommended Trailer Hitch for a 2020 Subaru WRX STI

Question

Question:

Do you guys have a trailer hitch for a 2020 Subaru WRX?

asked by: Kyle

0

Expert Reply:

The trailer hitch I recommend for a 2020 Subaru WRX STI is the EcoHitch Invisi Trailer Hitch Receiver part # 306-X7257. The EcoHitch Invisi is a direct bolt-on fit with no drilling required and retains a hidden design as it is hidden behind the rear bumper fascia/knock-out panel. Therefore, you also won't have any reduced ground clearance.

expert reply by: Conner L

0

Answer 1

For the 2020 Acura MDX I recommend the etrailer.com Trailer Hitch Receiver part #e98840 because it provides the best ground clearance compared to the other options so the bike rack will be less likely to drag the ground on steep drive ways or other…

view full answer...

Answer 2

The best trailer hitch we have for clearance on your 2013 Toyota Highlander is the EcoHitch Hidden Trailer Hitch Receiver #306-X7137 as it has a crosstube that sits behind the bumper so the only part below the bumper is the 2" hitch receiver…

view full answer...

Answer 3

The big difference is the bike stand that the NV 2.0 part #NV22G comes with and the lack of it on the #BA22B which is the base model of this rack. For the NV 2.0 here are the dimensions: Closest part of rack when folded down: 10-1/2" Closest…

view full answer...

Answer 4

The length of the receiver on hitch #306-X7211 isn't the issue. It is were the hitch pin hole is relative to the end of the receiver which on this model is close to 1-1/2 inches. Standard is around 2 inches (on center). The receiver…

view full answer...

Answer 5

The Kuat NV 2.0 Base 2-Bike Platform Rack part #BA12B weighs 49 lbs. The weight of this rack and the weight of your bikes cannot exceed the tongue weight capacity of the vehicle. For example, if the bikes weigh 57 lbs each then your total tongue…

view full answer...

Answer 6

The Draw-Tite Sportframe Trailer Hitch Receiver part #DT24959 (25 Lbs) and EcoHitch Invisi Trailer Hitch Receiver part #306-X7211 (30 Lbs) are both great options for a 2013 Subaru Impreza Wagon. I recommend the EcoHitch because it has the best look…

view full answer...

Answer 7

We carry one 2 inch trailer hitch receiver to fit your 2015 Subaru Impreza, the EcoHitch, part #306-X7211. However, it only fits if your vehicle has the knock out panel on the rear bumper. If your Impreza doesn't have a knock out panel then…

view full answer...

Answer 8

Curt trailer hitch #C11286 is listed as a fit for the 2016 Subaru Impreza 5-door wagon with single exhaust. So if your sport model is the 5-door wagon/hatchback and has single exhaust then this hitch will fit. We have had numerous customers install…

view full answer...

Answer 9

The EcoHitch part #306-X7211 that you have is a 2 inch hitch so you have great options like the etrailer folding cargo carrier part #e98874 which is a folding option that has platform dimensions of 24 inch by 60 inch. I attached a link to this page…

view full answer...

Answer 10

If you are considering the Thule Helium Pro 3 Bike Rack - 1-1/4" and 2" Hitches #TH9043PRO and the Thule Apex XT 4 #TH9025XT, there are some differences to consider. First off, since the Helium is made of durable aluminum, it has a lighter…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Trailer Hitch for a 2020 Subaru WRX STI

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching