Does Curt Brake Controller Harness Fit New Body Style 2020 Ram 1500

Question

Question:

I have a Curt brake controller that I want to move over to my new truck, so Ill need a new harness adapter. Can you confirm that this adapter can be installed in the new body style 1500, and not the older Ram Classic? I only have to ask because my dealer was dumb and ordered a truck with the highest axle ratio but no factory brake controller... Thanks!

asked by: Brett D

0

Expert Reply:

Yes I can; the Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # C51458 is a fit for the new body style 2020 Ram 1500.

expert reply by: Kyle S

0

Answer 1

If you check out the attached instructions for the Curt TriFlex Trailer Brake Controller #C24VV you can see that the OL code you are getting means that there is an "Overloaded output circuit, trailer brake system fault". Whichever…

view full answer...

Answer 2

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 9

Hey Mike I checked with Westin and I can confirm that the Westin HDX Xtreme Nerf Bars item #W45XV do indeed fit the 2021 Ram 1500 Quad Cab. The instructions on their website say crew cab as well. This is pretty common amongst aftermarket part…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

You'll need to adjust the bunks on the Malone LowBed MicroSport Trailer #MAL25FR some to account for the shape of the pontoons but yes, this trailer will have no issues working with your Blue Sky Boatworks 360 Pro fishing kayak!

view full answer...