Does EcoHitch 306-X7900 Front Hitch Replace the Factory Tow Loops when Installed on 2017 Ram 3500

Question

Question:

The pictures indicate the product comes with the tow hooks built into the hitch. Is this the case or do I have to use the existing tow hooks installed on the truck? thanks

asked by: Dale

1

Helpful Expert Reply:

That is indeed the case. During the installation, the factory tow loops are removed and their attachment points are used to install the # 306-X7900 hitch. The tow hoops integrated into the hitch will sit right where the factory ones did.

expert reply by: Mike L

1

Answer 1

For your 2018 Ram 2500 we have two front hitches that are confirmed as a fit. We have the Draw Tite part #65063 which has the hitch opening much higher as it comes out of the lower bumper or we have the Curt part #C31015 which has the hitch opening…

view full answer...

Answer 2

Nope, the airflow to the intercooler radiator on your 2018 Ram 3500 will not be disrupted when you install the EcoHitch front hitch that fits, which is the following part number: - EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7900

view full answer...

Answer 3

EcoHitches like #306-X7900 are typically a more expensive brand than others like Draw Tite. This is mostly due to fact they are Made in the USA and only made from recycled materials (hence the name) which adds a bit of cost. They typically have…

view full answer...

Answer 4

The 2 inch receiver for the EcoHitch Hidden Front Mount Trailer Hitch #306-X7900 referenced in your question will actually protrude through the grille of your truck. This allows for a really clean appearance while also maintaining your existing…

view full answer...

Answer 5

You are correct that if your 2018 Ram 2500 has the factory tow hooks, they will need to be removed to install the EcoHitch Front Mount Trailer Hitch Receiver #306-X7900 but they will not be able to be reinstalled. With that said the #306-X7900 has…

view full answer...

Answer 6

You will need the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR for your 2020 Ram 2500 Diesel with the parking sensors. The EcoHitch #306-X7900 only fit up to the 2010-2018 model years. This hitch will included a license plate bracket if…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does EcoHitch 306-X7900 Front Hitch Replace the Factory Tow Loops when Installed on 2017 Ram 3500

Product Page this Question was Asked From

Continue Researching