Will Draw-Tite Trailer Hitch # 24795 Fit a 2008 Hyundai Accent Hatchback
Question:
Would this hitch also work on the 2door hatchback? 2008 Hyundai Accent. Thanks.
asked by: Ardy C
Expert Reply:
Yes, Draw-Tite trailer hitch # 24795 will fit the hatchback models of the 2008 Hyundai Accent. We list it as fitting the sedan and 3-Door hatchback because the rear hatch is being counted as a door. I have included a link to the installation instructions and a link showing a typical installation on a similar vehicle for you.
If you plan on doing some towing, the correct ball mount is # 3594 and you can use pin and clip # PC2. For a 1-7/8 inch diameter ball use # 19256 and for a 2 inch use # 19258. For trailer wiring, use number 1191785KIT. I have included a link to the installation details for the wiring as well.
Products Referenced in This Question
Tekonsha Tail Light Converter with 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Hidden Hitch # 60872 vs. Draw-Tite # 24795 for a 2010 Hyundai Elantra
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Difference Between The Curt C11092 And The Draw-Tite Sportframe 24795 Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Draw-Tite Receiver Location Relative to Rear Bumper of 2009 Hyundai Elantra
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch and Related Towing Items for 2010 Hyundai Accent 3-Door Hatchback
- Q&A: Recommended Hitch Receiver for 2011 Hyundai Elantra Sedan
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: Trailer Hitch Receiver For 2002 Toyota Camry
- Q&A: Difference Between Hidden Hitch # 60872 and Draw-Tite # 24795 for 2008 Hyundai Elantra
- Article: How to Measure a Trailer Axle
- Article: How to Charge a Dump Trailer Battery
- Article: Best Bike Racks for Electric Bikes