Curt Hitch that Fits 2019 GMC Sierra 1500 with Factory Hitch

Question

Question:

Do I have to take off the factory hitch from my GMC Sierra 1500 Sle so this one can fit, I want to have like 21” ground clearance not 18” for example if I leave the factory hitch on. thank you

asked by: Jon

0

Expert Reply:

The Curt hitch part # C31088 that you referenced is actually a front hitch so it would not interfere at all with the factory hitch on your 2019 GMC Sierra 1500. We do have the Curt hitch part # C15307 which is a confirmed fit for your truck with a factory hitch. This does hang below the factory hitch so ground clearance is affected. See picture.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I can tell you exactly which trailer hitches fit your new body style of 2019 Chevy Silverado 1500, and there are two options depending on if you have the factory hitch or not, though neither of the hitches are a Class IV square tube hitch. The only…

view full answer...

Answer 2

It is possible to lift a trailer. You can do this by moving the axles from being above the leaf springs to below the leaf springs. The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3…

view full answer...

Answer 3

The Jayco Jay Feather Lite x17z uses a Dexter Torflex Axle so we do have lift kits available. The correct one is the Torflex Lift Kit part #K71-707-01 for model #10 from 2,300 lbs to 4,000 lbs.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 is going to need some rails to mount to in the bed of your 2020 Chevy Silverado. For this I recommend the Demco Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th…

view full answer...

Curt Hitch that Fits 2019 GMC Sierra 1500 with Factory Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching