Which Trailer Hitch Will Fit 2020 Mazda 3 Hatchback

Question

Question:

I have a 2020 Mazda 3 hatchback. Can you please tell me which trailer hitch will fit?

asked by: Lisa

0

Expert Reply:

For your 2020 Mazda 3 Hatchback the Curt Hitch # C98BR is a confirmed fit and will work perfectly. This custom hitch will line right up to existing holes in the vehicle's frame rails for a bolt-on (no-drill) installation and features a 200 pound tongue weight capacity and a 2,000 pound towing limit.

All the necessary hardware will be included. I have attached the full installation manual below that you can also look through.

expert reply by: Chris R

0

Answer 1

For the 2022 Mazda 3 hatchback we have the Curt hitch part #C98BR as a confirmed fit. The part #24982 only fits the sedan models.

view full answer...

Answer 2

According to my research the Curt Trailer Hitch Receiver #C98BR will fit your 2022 Mazda 3 with the rear diffuser, but you'll likely need to trim it up a little to keep the hitch from pushing up on that diffuser. We haven't had any reports of…

view full answer...

Answer 3

Yes the Curt #C98BR is a fit for your 2019 Mazda 3 hatchback with the rear diffuser. I attached a picture of this hitch installed on a similar Mazda 3 that has the same the rear diffuser.

view full answer...

Answer 4

For your 2020 Mazda 3 Hatchback we have the Curt Hitch #C98BR, which represents the highest rated option available with a 2,000 pound towing weight capacity and a 200 pound tongue weight limit. Based on my research both of these numbers exceed the…

view full answer...

Answer 5

Trailer hitch installs and trailer wiring installs are totally separate processes. It wouldn't be a situation where "well, you're already half way there may as well do the wiring too." So if you wanted to start with a hitch now like…

view full answer...

Answer 6

There is a trailer hitch receiver that will fit a 2021 Mazda3 (both the sedan and hatchback), though a hitch from a 2010 won't be able to be transferred. The reason for that is the Mazda3 underwent a design change for the 2019 model year, so the…

view full answer...

Answer 7

There is definitely a trailer hitch that is designed to fit your 2019 Mazda 3 hatchback, the Curt Trailer Hitch Receiver #C98BR, which is a Class I hitch that has a 1-1/4 inch receiver and is a bolt-on installation so no drilling is required. Since…

view full answer...

Answer 8

For your 2021 Mazda 3 there is actually only the one option, the Curt #C98BR which is a Class I trailer hitch with a 1-1/4" receiver; the tongue weight rating is for 200 lbs. Although this has a towing weight rating of 2,000 lbs, it should be…

view full answer...

Answer 9

Tongue weight represents the maximum amount of downward force that can be safely suspended from the hitch, whether it be tongue load applied from a trailer coupler, or a hitch mounted accessory like a bike rack or a cargo carrying tray like the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Which Trailer Hitch Will Fit 2020 Mazda 3 Hatchback

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching