Does Draw Tite Hitch Fit 2020 Toyota Corolla Hybrid Sedan
Question:
Does this trailer hitch #24983 fit 2020 Toyota Corolla Hybrid 4 door sedan LE? Also, I need wiring, too. Do you have wiring kit?
asked by: Dennis B
Expert Reply:
Yes, the Draw Tite hitch part # 24983 has been confirmed as a fit for your 2020 Toyota Corolla Hybrid 4 door sedan LE! We checked with Draw Tite recently and they confirmed that the fit does include the hybrid models like what you have.
For trailer wiring the kit you want is the Tekonsha part # 118810 which will install easily and has a very reliable converter box which means it will work well for a long time and be more resistant to trailer wiring shorts than other kits.
The recommended ball mount is the part # 3593 and for hitch balls you'd want the # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose a Hitch-Mounted Bike Rack
- Q&A: Will The Draw-Tite Sportframe Trailer Hitch Receiver # 24983 Fit A 2024 Toyota Corolla Hybrid LE AWD
- Q&A: Trailer Hitch that Fits 2024 Toyota Corolla Hybrid
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Is Lock Needed for Lower Hitch Opening of EcoHitch Stealth Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Function of the Red Wire on a Pollak 7-Way Trailer Connector/Wiring Harness
- Q&A: Replacement Dexter Brake Assemblies for 36-19 Assemblies
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Q&A: How Many Amps does the Motor Draw for the Electric A-Frame Tongue Jack, # LC285318
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: Roadmaster Vehicle Specific Base Plates
- Article: What Do I Need To Tow A Trailer?