Can I Install A Wiring Harness On My 2020 Cadillac XT5 Without Having To Splice Wires

Question

Question:

can i install a 4-way connector on the 2020 Cadillac XT5 without splicing wires? already have the hitch

asked by: Molly T

0

Expert Reply:

Yes you can install a 4-way connector on the 2020 Cadillac XT5 without splicing wires with Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package part # 118720 which will plug directly into the OEM tow package wiring harness. The photos show where the wiring harness will plug into. I have attached an installation video for your reference on the 2017 Cadillac but the install will be the same for the 2020.

expert reply by: Heather A

0

click to enlarge

Answer 1

Yes, there is a port on the back of your 2017 Cadillac XT5 that will be used for a trailer wiring harness. This port is located behind the lower bumper cover access panel which you can see in the attached photo. Once you find the plug I then…

view full answer...

Answer 2

From the information I can find I believe your 2019 GMC Acadia will have the wiring routed back towards the rear of your vehicle whether you have the factory tow package or not (see attached photo). If you check up under the rear bumper of your…

view full answer...

Answer 3

The wiring harness I recommend for your 2018 GMC Acadia that does not have the factory tow package is the T-One Vehicle Wiring Harness #118720 because of how easy it is to install on your Acadia; you will only need to plug it into the connection…

view full answer...

Answer 4

There isn't a trick to removing the cap on the tow plug of your 2019 Cadillac XT5 to install the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #C56325. I have added a link below to an installation…

view full answer...

Answer 5

The 2017 Cadillac XT5's should all come with a tow package port regardless of options so the trailer wiring harness installs are all plug-in play, there is no physical battery connection. I recommend the T-One Vehicle Wiring Harness part #118720…

view full answer...

Answer 6

The 2020 Cadillac XT5 has a tow package port which is located behind the rear bumper fascia. Therefore, you can use a plug-in-play wiring harness which does not require any wire splicing or cutting. I recommend the T-One Vehicle Wiring Harness part…

view full answer...

Answer 7

For your GMC Acadia the best hitch option we have is the Draw Tite part #76023. The reason I recommend this hitch is that when not in use you can install the bumper cover on top of it and it would be totally hidden. Then for trailer wiring the T-One…

view full answer...

Answer 8

The Curt trailer hitch part #C13418 is your best option for a trailer hitch for towing. This USA assembled hitch is very easy to install, has plenty of towing capacity and installs behind the rear bumper panel of your Blazer (see picture) so it's…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Can I Install A Wiring Harness On My 2020 Cadillac XT5 Without Having To Splice Wires

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching