Replacement Extang Tuff Tonno Cover for 2013 Toyota Tacoma with 6 foot Bed

Question

Question:

Is the EX13710 the correct replacement cover for 2013 Toyota Tacoma Access Cab with the 73.2inch bed?

asked by: Colin G

0

Expert Reply:

The Extang Tuff Tonno Soft Tonneau Cover that fits your 2013 Toyota Tacoma with the 6' bed is part # EX14915 which makes the replacement cover part # EX13915.

The part # EX13710 that you referenced is a replacement for the Extang Tuff Tonno that fits an F-150 so it won't fit your Tacoma.

expert reply by: Jon G

0

Answer 1

First you are going to need to identify the cover on your 2013 Toyota Tacoma. Since it was installed by a dealer you will want to first check underneath your tarp for and manufacturer information stamped onto the tarp itself. Next you will want to…

view full answer...

Answer 2

Yes, the Replacement Cover for Extang Tuff Tonno Tarp part #EX13915 is made by Extang.

view full answer...

Answer 3

The Extang Tuff Tonno that you have on your 2006 Chevy Colorado would be the part #EX14660. The correct replacement tarp you would need would be the part #EX13660.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 9

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Replacement Extang Tuff Tonno Cover for 2013 Toyota Tacoma with 6 foot Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching