Choosing the Correct Trailer Hitch and Accessories for a 2008 Chevy Cobalt LT1
Question:
Does this product fit on the 2008 Chevrolet Cobalt LT1 or just the SS? The under side of my car looks just like in the video.
asked by: Chris
Expert Reply:
For the 2008 model year, the Draw-Tite trailer hitch # 24756 fits the Sport, Sport Sedan, and SS Coupe models of the Chevy Cobalt.
If you have a regular sedan or coupe model you would need the Curt hitch # C11430. The underside of each may look similar but the mounting locations and hitch design are different which is why there are different hitches for each.
I have included links to the installation instructions for both hitches for you to view. If you require the first hitch, 24756, the correct ball mount is # 3594. For the second hitch, the correct ball mount is # 3593. For either ball mount you can use pin and clip # PC2. For a 1-7/8 inch diameter ball use # 19256. For a 2 inch use # 19258.
For trailer wiring, if you have a Sport sedan or regular sedan use # 118398. If you have a any type of coupe, use # 118407. I have included links to the instructions for the wiring as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: BOLT brand vehicle and hitch locks
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Performance Chip Tuners
- Shop: BOLT Trailer Hitch Receiver Lock for 1-1/4" Hitches - Codes to Late Model GM Key
- Shop: BOLT Covered Padlock - 2" Shackle - Codes to Late Model GM Key
- Shop: 1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Shop: BOLT Trailer Coupler Lock - 1-7/8", 2", and 2-5/16" Couplers - For Late Model GM Key
- Shop: Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Shop: Base Plate for Tow Bar
- Shop: Windshield Covers
- Shop: Roof Rack
- Q&A: Does Rhino Rack Roof Rack for 2017 Honda Fit fit Outside of Roof Rail Channel
- Video: PackEm Wheel Tie-Down Kit Review
- Video: Valterra Wheel Chock Review
- Video: Valterra Wheel Chocks - Wheel Chock - A10-0908 Review
- Video: Draw-Tite 2 Inch Long Shank Hitch Ball Review
- Video: Erickson Chrome Protector Sleeve Review
- Video: BOLT Covered Padlock Review BL7018517
- Q&A: E-Track Recommendations For 7 By 14 Enclosed Trailer To Carry Classic Motorcycles
- Q&A: Availability of Trailer Hitch Installation Video for a 2008 Chevy Cobalt Coupe
- Q&A: Tie-Down Recommendation for Bulldog Winch Ratcheting Wheel Tie-Down Strap
- Q&A: Weight Capacity of Draw-Tite Class 1 Trailer Hitch Receiver On Incline
- Q&A: 12 Inch Trailer Tire w/ High Load and Speed Rating
- Article: Trailer Hitch Receiver Sizes
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55432 Review
- Q&A: Installation Video for Trailer Hitch that Fits a 2010 Chevy Cobalt Sedan Non-SS