Replacement Double Waste Valve for 2006 Forest River Flagstaff

Question

Question:

I have a 26 ft 06 Flagstaff by Forest River and need to replace my old valves. Would this fit? If not could you suggest a part that will fit. FYI I put on a Twist valve as a temporary solution.

asked by: Natalie H

1

Helpful Expert Reply:

Yes, since I was able to see a picture of your current valve setup I can tell that the Bristol Double RV Waste Valves # 34466ND13AAR that you referenced is exactly what you'd need. The valves of this kit will fit over the 1-1/2 inch and 3 inch pipes you have on your setup perfectly.

I attached a review video for more info as well.

expert reply by: Jameson C

1

Answer 1

Product #34466ND13AAR is a hub, a hub or a socket is the common female connection to PVC fittings. While #34466ND13BAR is a spigot, which is the end connection to a fitting that has to be assembled into another fitting; the spigot fitting has the…

view full answer...

Answer 2

The distance between the 3" entry and the 1.5" entry on the Bristol Double RV Waste Valves #34466ND13AAR is 10-1/2". I've attached a picture for you showing some additional measurements as well.

view full answer...

Answer 3

The Bristol Double RV Waste Valves part #34466ND13AAR is a universal double valve not specific to any one particular trailer. It would require the black water pipe to be 3" diameter and the grey water pipe to be 1.5" diameter but aside from…

view full answer...

Answer 4

The correct replacement sewer valves for the Pleasure Way Lexor TS is the Bristol Double RV Waste Valves part #34466ND13AAR. In regards to installation, you can reuse the outside flanges from your existing sewer valves so long as they are in good…

view full answer...

Answer 5

Thank you for the pictures of your LaSalle Bristol V93B1, it made it a lot easier to find the correct replacement to get your RV's sewer system back in working order. The V93B1 appears to just be the actual drain pipe with the gray dumping into…

view full answer...

Answer 6

The difference is the connection the two valves make after the valves come together. The part #T81 uses a spigot connection for a permanent install and the #T80 uses a bayonet style fitting which allows for easier connection and disconnection.

view full answer...

Answer 7

The differences between the Valterra #T80, #T80C, and #T80A simply has to do with the types of connections that they have. They vary between Hub (female) and Spigot (male) ends to suit your needs. The ends that change are on the side. The top of each…

view full answer...

Answer 8

The Double RV Waste Valves - Elbow - Rotating - 3" Spigot and 1.5" Hub to 3" Lug #T80A is 10-1/2" in length from the 3" spigot to the 1-1/2" hub.

view full answer...

Answer 9

From the sound of your question, it looks like you need either the Bristol Double RV Waste Valves - Elbow - Rotating #34466ND14AAR (if you have 3" and 1.5" Hubs to 3" Spigot) or the #34466NDHR19AAA (if you have 3" Hubs on both…

view full answer...

Answer 10

The differences between the Valterra #T80, #T80C, and #T80A simply has to do with the types of connections that they have. They vary between Hub (female) and Spigot (male) ends to suit your needs. The ends that change are on the side. The top of each…

view full answer...

Answer 11

The Wheel Masters Tire Pressure Valve Extenders - 180-Degree Bend - Aluminum Rear Wheels - Qty 2 #WM8029180 are a great option but for a little more accessibility it sounds like you'd prefer something more like the Wheel Masters 2-Hose Inflation…

view full answer...

Answer 12

The use of the jacks on your Ford F-53 will not be impacted by the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Front Axle #AL88240. You don't want to keep the bags stretched though, if that was what you…

view full answer...