Availability of Lift Kit for Lippert 7K Axles on Sundowner Toy Hauler

Question

Question:

Trying to lift a Sundowner toy hauler with a pair of lippert 7k torsion axles. Does anyone make a kit?

asked by: Samuel S

0

Expert Reply:

If you are saying that your Sundowner toy hauler has dual 3,500 lb axles for a total of 7,000 lbs axle weight capacity then you can use part # LC270682 if you have a diamond torsion axle or part # LC382741 if you have a square torsion axle. These provide you with a 3-1/2" lift and can be used for your dual axle application, just use 2 kits.

If you have 2 axles that are rated for 7K each then unfortunately there aren't any lift kits available and you'd need to change them out completely to add any sort of lift kit. I confirmed all of this with my contact at Lippert.

Let me know if you have the 7K axles and I can help you look into alternatives to raise your trailer height.

expert reply by: Jon G

0

Answer 1

Yes, we can ship the Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper part #TLA7900 to you in Canada! However, the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included and all prices…

view full answer...

Answer 2

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

view full answer...

Answer 3

In order to determine the correct lift kit for your Sundowner horse trailer, you'll need to know the type and weight capacity of the axle you have. For example, if you have round 3" axles you would need the Dexter Trailer Springs Over-Under…

view full answer...

Answer 4

Based on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02. I recommend verifying…

view full answer...

Answer 5

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 6

I sent your axle info to Dexter and they were able to determine that you have a set of 7k Dexter Torflex axles so the correct lift you need is the part #K71-725-02 which will give you a lift of 3-1/8 inches.

view full answer...

Answer 7

Thank you for the pictures! I reached out to my contact at Dexter Axle who was able to confirm that you have #11 Torflex axles so the correct lift kit is part #K71-724-02. Since yours has top mounting holes you also need the bracket kit #DX57FR for…

view full answer...

Answer 8

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 9

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Availability of Lift Kit for Lippert 7K Axles on Sundowner Toy Hauler

Products Referenced in This Question

Continue Researching