What Comes with Blue Ox Base Plate Hardware Kit # 63-3127

Question

Question:

iwould like to see if the # 61-5208 is in the kit

asked by: Lynn

0

Expert Reply:

I attached a picture that shows all of the hardware that comes with the # 63-3127 that you referenced. This is replacement hardware for # BX1692.

There isn't a limit on how many of these you could order either.

expert reply by: Jameson C

0

click to enlarge

Lynn

10/3/2019

iwould like to see if the # 61-5208 is in the kit

Reply

Jameson C.

10/3/2019

The nut plates part # 61-5208 are not included in the kit. You would need a total of 12 of the # 61-5208 if you needed all of what came with the # BX1692.

Reply

Answer 1

The Roadmaster Falcon 2 tow bar you have #RM-520 can connect to the etrailer base plate kit part #e98949 you have but you do need an adapter as the connection cannot be made directly. So what you'll need in addition to what you have is the part…

view full answer...

Answer 2

The Blue Ox Base Plate Kit, part #BX2246 is indeed compatible with the 2008 and 2011 Honda CR-V. I'm assuming you're planning on moving the base plates from the 2008 model and installing them on the 2011 model. If you do so, you will NOT want…

view full answer...

Answer 3

The Replacement RF Controller for Blue Ox Patriot II or Patriot 3 Supplemental Braking System part #BLU66CR does not come with the rubber dash mount. If you need this, I recommend reaching out to Blue Ox directly. That said, you could also just use…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Answer 8

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Answer 9

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 10

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

M12-1.5 and 1/2"-20 threads are not going to be interchangeable. The diameter of an M12 thread is only going to be 0.4724" while 1/2" threads are going to be 0.500" in diameter. We currently only have 1/2"-20 Lug Nuts…

view full answer...

What Comes with Blue Ox Base Plate Hardware Kit # 63-3127

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching