Clip On Style Tow Mirror Recommendation for 2020 Jeep Gladiator

Question

Question:

Is there a towing mirror clip on available for the Jeep Gladiator ? I dont want to remove the factory mirrors.

asked by: Bill G

0

Expert Reply:

I looked up the mirrors you have on your 2020 Jeep Gladiator and they are shaped and designed like a pretty standard mirror so our clip on universal towing mirrors like the CIPA part # 11953 will fit and work well. This mirror will attach to the lip around the outside of your mirror housing and tightens down the straps on the outside of the housing. I attached a picture of this mirror installed on a Jeep as yours plus an install video link as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Great question. I recommend the sumo springs for sure: SumoSprings Solo Custom Helper Springs - Rear Axle #SS62XR. This type of solid helper spring is a great choice for any vehicle that has the potential to go off road. Who wants to worry about…

view full answer...

Answer 2

I have another option for you, but the Timbren Active Off-Road Bumpstops - Rear Suspension - 3,000 lbs #T86FR you were looking at for your 2020 Jeep Gladiator is not designed to prevent sag from towing a trailer, but instead is designed to give you…

view full answer...

Answer 3

Choosing the correct rear suspension enhancement for your 2022 Jeep Gladiator will depend on how much sag you are actually getting and if you want to have something that is adjustable or not. The SumoSprings Solo Custom Helper Springs #SS62XR will be…

view full answer...

Answer 4

The SumoSprings Solo Helper Springs #SS62XR you were looking at for your 2021 Jeep Gladiator measure in at 5-1/2" tall and 3-3/8" wide as shown in the included diagram. I included a video review of the #SS62XR for you to take a look at.

view full answer...

Answer 5

I would be happy to help you and I have a great set of helper springs for your 2022 Jeep Gladiator. I recommend the SumoSprings Solo Custom Helper Springs item #SS42XR. These SumoSprings have a 1,400 lbs capacity. They will keep your vehicle level…

view full answer...

Answer 6

That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to connect the #90195…

view full answer...

Answer 7

K-Source has a custom fit tow mirror setup for your 2020 Jeep Gladiator with the part #KS39NQ. These will install easily without tools, fit great, and allow you to retain use of mirror turn signals, puddle light, blind side cameras, etc.

view full answer...

Answer 8

For your 2020 Jeep Gladiator we have the CIPA tow mirrors part #11953-2 which will fit and work great. These install easily, mount securely, and since they have a dual view mirror on either side gives you the best visibility overall. We had a chance…

view full answer...

Answer 9

I recommend the K-Source Snap & Zap Custom Towing Mirrors #KS39NQ for your 2022 Jeep Gladiator. These mirrors are designed to snugly fit around your factory mirrors without the need for straps or additional parts to hold them in place. They fit…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...