Does XL Lets Go Aero Anti-Rattle Trailer Hitch Receiver Lock Fit 2019 Ford F-250

Question

Question:

DO IT FIT A F-250 SUPER DUTY 2019?

asked by: MMMM

0

Expert Reply:

Yes, the XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches # SHP2040-XL does fit the 2-1/2 inch hitch you have on your 2019 Ford F-250. I attached a review video for this lock for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The XL Anti-Rattle Trailer Hitch Receiver Lock #SHP2040-XL has an inside pin length of 3-7/8". While it was designed to be used with 2-1/2" receivers you can also use it with 3" receivers that meet the 3-7/8" overall width…

view full answer...

Answer 2

The #SHP2040-XL will work with most 3 inch receivers as long as the overall width of the receiver tube measured at the hitch pin hole isn't greater than 3-1/2 inches. If your receiver meets that requirement, the #SHP2040-XL will help prevent your…

view full answer...

Answer 3

The Gen-Y Iron Grip Anti-Rattle Hitch Pin #GY49FR (part GH-023 you mentioned) is designed for solid shanks but the XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches #SHP2040-XL uses that block that sits inside a hollow shank so the…

view full answer...

Answer 4

The 2019 Ford F-350 is going to come equipped with either a 2-1/2" or 3" trailer hitch which is determined by measuring the inside of the receiver tube opening. The XL Anti-Rattle Trailer Hitch Receiver Lock part #SHP2040-XL will only work…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Thanks for the pictures! No, I am sorry Richard you can not. The B&W Continuum item #BW78FR only works with frames that are 5" and 6" tall. Instead, I recommend using the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control…

view full answer...

Answer 8

The steel Torklift camper tie downs that fit your 2018 Ford F-350 long bed part #TLF2021 and #TLF3008 weighs 74 lbs total whereas the aluminum version part numbers #TLF2021A and #TLF3008A weigh 66 lbs so it's about 8 lb lighter.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

We have just what you're looking for with the Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers #GY88XR. The sleeve acts as a wedge to take out play between your hitch receiver and extender. Although it does not not require a wrench and a…

view full answer...

Answer 11

Hey Buddy, so the Fastway Adjustable Ball Mount part #DTSTBM6825-2S is a really great choice for the 2-1/2 inch hitch of your 2021 Ford F-250 which is going to be very solid in your hitch due to it's built in anti-rattle device that is easy to…

view full answer...

Answer 12

To keep your back end from squatting, I recommend the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension item #CSS-1094R. These insert into your rear springs and keep your suspension from being pushed down by the weight of your…

view full answer...

Does XL Lets Go Aero Anti-Rattle Trailer Hitch Receiver Lock Fit 2019 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching