Outer Valve Extensions with No-Drill Bracket for Motorhome

Question

Question:

I have a motorhome with outer valve stems unable to see, let alone add air to. I need extensions to get the valve to the outside of the wheel. I do not want to drill for a bracket, just a braided line around 4inch to get it there, perhaps wire the wire style holder to mount it to a hole in the rim. What do you have to accomplish this? Thanks !

asked by: David B

0

Expert Reply:

The Wheel Masters 4-Hose Inflation Kit # WM8208 that you were looking at should work well for the wheels on your motorhome. The kit includes two 9-1/2" long braided steel hoses for the outer wheels and two 13" braided steel hoses for the inner wheels of a dually. The included mounted bracket simply gets clamped to the sides of the wheels so there isn't any drilling required for installation.

I have attached a short video demonstration that you can check out as well.

We don't have a similar kit available that features shorter hoses. If you are just needing standard valve extensions for the outer wheels then we do have the Wheel Masters Tire Pressure Valve Extenders # WM80294. These simply get threaded onto the existing valve stems to provide a 4 inch straight extension. We also have the Wheel Masters # WM8029135 which have a 135-degree bend.

expert reply by: Chris R

0

Answer 1

We have valve extenders for your dual wheel tires. I recommend the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Wheel Cover Mount #WM8208. The length of the hoses with straight valve extenders is 13 inches.…

view full answer...

Answer 2

I do have an installation video of the Wheel Masters 4-Hose Inflation Kit part #WM8208 but keep in mind that the kit is more or less universal and not every wheel it will be installed on is the same so your application could vary. That said, the…

view full answer...

Answer 3

I recommend the Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels - Qty 2 Item #WM8029135 as the angle will allow you to get more bulky or stiff air chucks on than the 180 degree.

view full answer...

Answer 4

When you use the Wheel Masters 4-Hose Inflation Kit #WM8208 on wheels that have covers you will have the brackets clamp to sides of rear wheels before wheel covers are installed. Basically you would install the clamp and then install the wheel…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 7

It is really not a great idea to drive with a trailer cover like the part #052963735635 installed on a trailer. The only way I could safely recommend you do so is if you were to keep the speeds under 25 miles per hour and you weren't on a public…

view full answer...

Outer Valve Extensions with No-Drill Bracket for Motorhome

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching