Replacement Operator Mechanism and Lift Arm For 7000K MaxxFan Deluxe Roof Vent

Question

Question:

Sirs - I have a MaxxFan 7000K, SN: 2012-02-7000K-0128 where the worm gear in the operator lift mechanism is broken / stripped ... Ive checked your parts list and it appears that the MA10-20281K-1AF Operator Mechanism, Automatic Liftinch and the 10-20222KS, Lifter Arminch are separate pieces however, on my unit, the two parts are integral and do not separate that is until I broke it apart ... my question ... can I use both the individual Operator Mechanism AND the separate Lifter Arm as a bolt-in replacement for my combination mechanism/arm unit ? thanks in advance for your assistance

asked by: Mike K

0

Expert Reply:

Yes, you can use both the operator mechanism part # MA10-20281K-1AF and the lift arm part # MA10-20222KS to replace the broken parts in the MaxxFan 7000K part # MA00-07000K as confirmed by MaxxFan.

expert reply by: Heather A

0

Answer 1

For your MaxxAir fan part #MA00-07000K we sell several replacement parts. For the buttons not working we offer the keypad part #MA10-21304K, for the lift motor #MA10-20270, and for the operator #MA10-20281K-1AF. With all three of these replacement…

view full answer...

Answer 2

Yes, we do offer the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents item #MA10-20281K-1AF. It is the replacement part for the operator mechanism #MA-10-20281K you referenced. However, we do not offer the…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 5

Yes the operator replacement part #MA10-20281K-1AF that you referenced will work as a replacement for your Maxxfan #4951ks.

view full answer...

Answer 6

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Answer 7

In order to replace the Advent Analog Wall Thermostat ACTH11 you'll need the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners part #ACRG15. This is a digital style replacement which is what you'll need since…

view full answer...

Answer 8

For a pair of stabilizer jacks that would have more than enough capacity that would work well on your R-Pod I would recommend the Stromberg Carlson Trailer Scissor Jacks part #JSC-24. These have a 5k capacity per jack and would do a great job as long…

view full answer...

Answer 9

If by serial number you mean VIN and the trailer manufacturer is still in business then yes, you would likely be able to obtain the bearing numbers from the manufacturer. If none of the above are true, then the only other way to determine which…

view full answer...

Answer 10

Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF is what you want for your MaxxAir Deluxe Fan if it is a power lift or the Replacement MaxxAir Roof Vent Manual Lift Operator #MA10-20281K-3CF if it…

view full answer...

Answer 11

It sounds like you are looking for the replacement key from Reese. Reese is a sister company of Fulton and Tow Ready who is now carrying the Gorilla Guard Coupler Locks #63228 and #63227. Replacement keys are no longer available so replacing the lock…

view full answer...