Bulb Replacement for Peterson # 440 Tail Light

Question

Question:

in the peterson #440 tail light, there are two different bulbs, one function and one marker. What is the part# of the marker bulb?

asked by: LARRY Y

0

Expert Reply:

The Peterson Combination Trailer Tail Light # 432200 uses either 1156 ( # DI49VR ) or 1157 ( # DI79VR ) replacement bulbs. The 1156 are single filament bulbs (marker lights) and the 1157 are double filament bulbs (multi-function).

expert reply by: Erik B

0

Answer 1

There are a wide variety of trailer lights offered and these come with different type of construction. Some lights may not be user-serviceable (such as some LED types and sealed waterproof lights) but usually trailer lights that use standard…

view full answer...

Answer 2

The two front-mount hitch receivers offered for your 2013 Nissan Titan 4WD, Curt #C31061 and Draw-Tite #65065, share common weight ratings but differ in their installation requirements. The Draw-Tite hitch does not require frame drilling as the Curt…

view full answer...

Answer 3

Optronics does not have a weight rating for their Magnetic LED Tow Light Kit #TLL21RK, however, this magnet is very strong and has been road tested at high speeds in varying weather conditions. This product is also made from durable polycarbonate,…

view full answer...

Answer 4

Thanks for the picture! That is exactly what I need to confirm what pin box your Forest River Shasta Phoenix 28RB has. I just spoke with my rep at Lippert and you have a 1621 pin box with an 18,000 lbs capacity. You will want the Gen-Y Hitch 5th…

view full answer...

Answer 5

A gooseneck adapter cannot be used with the Trailair Rota-Flex 5th Wheel Pin Box - Lippert 1621 - 21,000 lbs #LC328329 because of the excess play and movement that would be present at the connection point. You would instead need to swap out your…

view full answer...

Answer 6

For a submersible version of the Peterson Light Kit part #M540 that you referenced you'd want the #TL5RK which comes with the exact same style of lights, wiring and bracket but is designed for boat trailer applications like yours! I attached an…

view full answer...

Answer 7

If the display on your Draw-Tite Activator Brake Controller, part #5504, shows the letters OL,or Overload Code, that is an indication that there is a short in the Blue wire circuit. The Blue wire supplies power from the controller back to the trailer…

view full answer...

Answer 8

The center-to-center measurement of the Replacement Lens for Wesbar 80 Series Tail Light, #2423286 is 3-3/4" across the top and from top to bottom. Please note the attached image.

view full answer...

Answer 9

The driver's side lamp, part #432400 has an additional function that the #432200 passenger side lamp does not. The driver's side features a clear lens on the underside of the lamp housing that would illuminate a license plate mounted…

view full answer...

Answer 10

You can use the Optronics LED 5-function passenger side tail light #STL008RB on the drivers side but you will want to install it upside down because of the side marker light. But because of the designs of the lenses, if the light is installed upside…

view full answer...

Answer 11

The Redline #LG440NP steel trailer lamp box works well with the Peterson #432400 driver's side and #432200 passenger side incandescent taillights, but I'd recommend going with LED taillights because they draw less power, are brighter and last…

view full answer...

Bulb Replacement for Peterson # 440 Tail Light

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching