Hard Tonneau Cover Options for 2019 Honda Ridgeline With Speakers in Bed

Question

Question:

My 2019 has the bed that is a Speaker... The holes that you show above do not exist on my model... Do you know where to run the drain on my model?

asked by: Spearmanto

0

Expert Reply:

Since your 2019 Honda Ridgeline has speakers in the bed I strongly recommend going a different direction than the Extang EnCore because there is no way to guarantee you can drill through that bed for the drain hose without damaging the speaker wires.

The best option by far is going to be a tonneau cover that has seals and no drain hoses that require drilling into the bed of your '19 Ridgeline. A great option at a similar price is the BAK Revolver X2 Hard Tonneau Cover # BAK39602 which is a hard tonneau cover that sits completely inside your truck bed rails for a smooth appearance and easy functionality.

expert reply by: Kyle S

0

Spearmanto

9/4/2019

My 2019 has the bed that is a Speaker... The holes that you show above do not exist on my model... Do you know where to run the drain on my model?

Reply

Kyle S.

9/4/2019

If you do not have the drain holes on your 2019 Honda Ridgeline you will not want to use the Extang EnCore because it does require you use those cut outs. There is no alternative area for drain holes because you have speaker wiring, and attempting to drill will almost certain mean you are going to drill right through the wiring. To avoid damaging the speakers or wiring in the bed of your '19 Ridgeline I highly recommend going with a cover that does not require drain holes that need to be drilled, and you can find great options for hard tonneaus in the same price range as the EnCore such as the BAK Revolver X2 Hard Tonneau Cover # BAK39602, TruXedo Sentry Hard Tonneau Cover # TX1530601, or TruXedo Sentry CT Hard Tonneau Cover # TX1530616. I have added links to video reviews for you to take a look at of these tonneau covers as well.

Reply

Answer 1

I have a tonneau cover solution for your 2019 Honda Ridgeline that is going to allow you to fully open your truck but it's not the Truxedo Sentry either as the rails would interfere. Instead you'd want the Extang Trifecta 2.0 part #EX92590…

view full answer...

Answer 2

I have added a photo for you showing the mounting brackets that are used for a 2020 Honda Ridgeline when installing the TruXedo Sentry Hard Tonneau Cover #TX1530601. You are correct they are different than the standard brackets as the brackets do…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...