Version of Go Power Sine Wave Inverter that has Transfer Switch

Question

Question:

Is that a knock out for direct wire to transfer switch? In other words does it bypass the built in outlets and work as regular power with lets say a 10-2 wire straight to main breaker on converter?

asked by: Jamey W

0

Expert Reply:

The terminals on the Go Power Heavy-Duty Modified Sine Wave Inverter # 34280178 are designed to have a 12 volt power source like a battery attached to and then on the other side of the inverter are standard sockets you'd see for AC power. This does not have a transfer switch like you mentioned that you'd run to a breaker panel/converter.

For an inverter that does have a transfer switch we have the # 34279458 which might be what you are looking for to run to a breaker panel.

expert reply by: Jameson C

0

Answer 1

A power inverter, or inverter, is a power electronic device or circuitry that changes direct current (DC) to alternating current (AC). So it will turn your battery power (DC) into (AC) like your house. This lets you use appliances and devices that…

view full answer...

Answer 2

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 3

The Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch #PD64FR will require separate bus bars. Your AC in will go to your main bus bar and your AC out will go to your secondary bus bar. The items on your secondary bus bar will be powered…

view full answer...

Answer 4

The Go Power Industrial Pure Sine Wave Inverter with Transfer Switch #34279458 has a 1,500 watt capacity so you'll just need to look up how many watts your CPAP machine pulls to determine if the inverter is rated high enough to power it.…

view full answer...

Answer 5

The Progressive Dynamics 2000 Watt Inverter w/ Transfer Switch #PD64FR still shouldn't be mounted in the battery compartment since it isn't ignition protected. I understand the thinking since lithium doesn't vent gases like other…

view full answer...

Answer 6

This is a pretty common issue as the 12 volt accessory/charge circuit is not always active on vehicles with OEM 7-ways. The solution is to run 10 gauge wire like part #10-1-1 (sold by the foot) through a breaker like part #9510 between the 1:00 pin…

view full answer...

Answer 7

I can definitely help you determine the correct inverter for your TV and coffee machine. To figure out the correct inverter, you simply need to know the amount of watts your TV and coffee machine use. While TVs don't generally consume much…

view full answer...

Answer 8

Hi James, To my knowledge the Reese Goosebox is the only replacement option that won't void the frame warranty. That being said, the frame warranty is typically only a year so you really aren't losing much voiding it, especially if you've…

view full answer...

Answer 9

Grease Seal #RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.

view full answer...

Answer 10

The Reese hitch you have will be compatible with ISR rails like the B&W #BWRVK2505. These custom-fit brackets are designed to work with factory holes in your Sierra's frame to make the installation easier and much faster. If you plan on…

view full answer...

Answer 11

The EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle. The proper replacements are available as part #23-450-451, which includes the left and right self adjusting brake…

view full answer...