Replacement Screen for Ventline AS-13-M-V101 Roof Vent

Question

Question:

We have the ventline as-13 m-v101 we r trying to find the correct part number for the screen

asked by: Mike

0

Expert Reply:

From the info I could find I believe the replacement screen for your Ventline AS-13-M-V101 is part # BVC0573-31 for birch white or part # BVC0573-41 for polar white. I have attached review and installation videos for you to reference.

If you have a different style screen please send me a photo of it and I can help you find a replacement.

expert reply by: Jon G

0

Answer 1

I reached out to my contact at Ventline and confirmed the correct replacement cover for your Ventline AS-13-M-V101. The replacement cover you want is #BV0554-01 in white or #BV0554-03 in smoke. I've attached video reviews of each of these as well…

view full answer...

Answer 2

The correct replacement cover for your Ventline AS-13-M-V101. The replacement cover you want is #BV0554-01 in white or #BV0554-03 in smoke. I've attached video reviews of each of these as well as an installation video to assist.

view full answer...

Answer 3

Yes, I can see from the photo you attached a continuous hinge which means the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part #BV0554-03 is what you need. I was also able to verify this by the model number of AS-13M.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement screen #BVD0434-31, the replacement lid #BVD0449-A01, and the replacement ceiling…

view full answer...

Answer 10

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 11

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 12

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Replacement Screen for Ventline AS-13-M-V101 Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching