Will etrailer e98848 Class III Hitch Interfere w/ Hands Free Rear Liftgate Function 2018 Honda CR-V

Question

Question:

Hello, Is this hitch compatible with the 2018 Honda CR-V hands-free lift gate function or do I need the sensor relocation kit? Thank you!

asked by: Mike S

0

Expert Reply:

From what Curt tells us, the hands-free liftgate feature will most likely not function with the # e98848 hitch installed. Some folks say the feature still works, but only on one or two specific spots, but we've also heard from folks where it won't work at all. Obtaining the # 08U59-TLA-100A from your local Honda dealer will be your best bet to ensure the liftgate feature works without problems.

When trimming the rear fascia, be very careful not to accidentally cut the wires leading to the sensor.

expert reply by: Mike L

0

Answer 1

I checked with Yakima and they list the Yakima SkyBox NX 16 Rooftop Cargo Box #Y95AV as a confirmed fit for the factory crossbars of your 2010 Subaru Forester. I attached a review video for this cargo box for you to check out as well.

view full answer...

Answer 2

Yes you can do exactly what you mentioned wanting to do. If you don't care at all about the hands free liftgate sensor you can install the hitch part #E98848 and be totally fine. We've actually heard that the sensor still works without…

view full answer...

Answer 3

When installing a hitch like the etrailer #e98848, you may or may not need the sensor relocation kit; we've seen some customers that have reported that the hands-free lift gate still works but that it requires touching a very specific spot and…

view full answer...

Answer 4

We do have a hitch for your 2023 Honda CR-V Hybrid, however it is not officially listed as a fit per the manufacturer. The etrailer Trailer Hitch Receiver #e98848 which is made by Curt, has not listed the Hybrid model as being compatible however we…

view full answer...

Answer 5

The trailer hitch I recommend for a 2021 Honda CR-V is the etrailer Trailer Hitch Receiver part #e98848 which has a 2" receiver. This hitch is a bolt-on fit with no drilling or welding required. It will not void the warranty of the vehicle nor…

view full answer...

Answer 6

The weight rating of your owners manual is the one that you want to use. Honda is telling you what your powertrain and chassis is capable of hauling without damaging their components. The hitch manufacturer gives the hitch a rating that it's…

view full answer...

Answer 7

Curt manufactures the #e98848 hitch for us. They don't list the hitch as a fit for the hybrid model, but we have successfully installed the hitch on a hybrid model and several of our customers have provided feedback that it's a confirmed fit.…

view full answer...

Answer 8

To trim the bumper fascia on your 2019 Honda CR-V when installing the etrailer.com Trailer Hitch Receiver #e98848 you can use a pair of snips or simply a sharp utility knife. The material isn't too thick so it's not going to take a lot of…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The etrailer.com Trailer Hitch Receiver #e98848 does require some fascia to be trimmed during installation (it's what allows for the hitch's sleek hidden design) and I can absolutely help you with this process. I have attached an image from…

view full answer...

Answer 12

I can see why this might be confusing. Yes, the EcoHitch #306-X7345 does fit on your 2020 Honda CR-V Hybrid and is a great choice. The EcoHitch provides you with the least visible hitch option, so you'll retain the factory look of your CR-V. This…

view full answer...